Size of biological flocs in activated sludge systems: Influence of hydrodynamic parameters at different scales. Issue 4 (August 2021)

• Record Type: Journal Article
• Authors: Pechaud, Yoan; Pageot, Sylvain; Goubet, Anne; Duran Quintero, Camilo; Gillot, Sylvie; Fayolle, Yannick
• Is Part Of: Journal of environmental chemical engineering. Volume 9:Issue 4(2021)
• Publication Date: 2021-08
• Subjects: Wastewater treatment -- Floc size -- Hydrodynamics -- Aeration -- Shear rate; Chemical engineering -- Environmental aspects -- Periodicals; Environmental engineering -- Periodicals; Chemical engineering -- Environmental aspects; Environmental engineering; Periodicals; 660.0286
• DOI: 10.1016/j.jece.2021.105427
• Languages: English
• ISSNs: 2213-2929

Abstract

Abstract: In conventional activated sludge (CAS) systems and membrane bioreactors (MBR), aeration, mixing and filtration are affected by various properties of activated sludge (AS) and especially viscosity and morphological properties of flocs. The aim of the present study was to understand the relationship between hydrodynamic conditions and AS floc size properties. Floc size distribution (FSD) measurements were performed in four systems showing different hydrodynamics: (i) a standard stirred reactor (SR), (ii) a pilot bubble column (BC), (iii) a full-scale aeration zone equipped with fine bubble diffusers, (iv) a full-scale filtration zone equipped with coarse bubble diffusers. The measurements were carried out on-site, using the mixed liquor from a full-scale MBR. The FSD of the given activated sludge mainly depends on the average shear rate ( γ ̇ ) and on the circulation time in the SR. To a lesser extent, local properties, such as maximal shear rate, also influence the FSD. In the same way, the main operating parameter governing the FSD in the BC was γ ̇ . For a similar γ ̇, the flocs were slightly larger in the BC than in the SR. In addition, in the full-scale systems, for a similar γ ̇ estimated, the FSD characteristic diameters were lower in the filtration zone (with coarse bubbles) than in the aeration zone (with fine bubbles). The FSD in the aeration zone was well correlated with the FSD in the BC whereas the flocs were slightly smaller in the filtration zone than in the BC. Graphical Abstract: ga1 Highlights: We analyze the influence of local and global hydrodynamic conditions on FSD of AS. The average shear rate ( γ ̇ ) and the circulation time mainly govern the FSD. The local hydrodynamic properties also influence the FSD but less significantly. In full scale reactors, the FSD depends mainly on γ ̇ and on the bubble size. For a given estimated γ ̇ the FSD is slightly higher in the SR than in the BC.