Comprehensive study on mechanical properties of coated biaxial warp-knitted fabrics. (January 2022)

• Record Type: Journal Article
• Authors: Yang, Bin; Shang, Yingying; Yu, Zeliang; Wu, Minger; Tao, Youji; Qin, Jiaxiang
• Is Part Of: Journal of reinforced plastics and composites. Volume 41:Number 1/2(2022)
• Page Start: 3
• Page End: 19
• Publication Date: 2022-01
• Subjects: Mechanical properties -- coated biaxial warp-knitted fabrics -- off-axial tensile test -- biaxial tensile test -- creep test -- linear orthotropic material model; Reinforced plastics -- Periodicals; Composite materials -- Periodicals; 620.1923
• DOI: 10.1177/07316844211020499
• Languages: English
• ISSNs: 0731-6844

Abstract

In recent years, coated fabrics have become the major material used in membrane structures. Due to the special structure of base layer and mechanical properties, coated biaxial warp-knitted fabrics are increasingly applied in pneumatic structures. In this article, the mechanical properties of coated biaxial warp-knitted fabrics are investigated comprehensively. First, off-axial tensile tests are carried out in seven in-plane directions: 0°, 15°, 30°, 45°, 60°, 75°, and 90°. Based on the stress–strain relationship, tensile strengths are obtained and failure modes are studied. The adaptability of Tsai–Hill criterion is analyzed. Then, the uniaxial tensile creep test is performed under 24-h sustained load and the creep elongation is calculated. Besides, tearing strengths in warp and weft directions are obtained by tearing tests. Finally, the biaxial tensile tests under five different load ratios of 1:1, 2:1, 1:2, 1:0, and 0:1 are carried out, and the elastic constants and Poisson's ratio are calculated using the least squares method based on linear orthotropic assumption. Moreover, biaxial specimens under four load ratios of 3:1, 1:3, 5:1, and 1:5 are further tensile tested to verify the adaptability of linear orthotropic model. These experimental data offer a deeper and comprehensive understanding of mechanical properties of coated biaxial warp-knitted fabrics and could be conveniently adopted in structural design.