Effect of Radial Porosity Oscillation on the Thermal Performance of Packed Bed Latent Heat Storage. (April 2021)

• Record Type: Journal Article
• Authors: Liu, H.B.; Zhao, C.Y.
• Is Part Of: Engineering. Volume 7:Number 4(2021)
• Page Start: 515
• Page End: 525
• Publication Date: 2021-04
• Subjects: Packed bed latent heat storage -- Radial porosity oscillation -- Fluid flow -- Heat transfer -- Diameter ratio; Engineering -- Periodicals; Engineering -- China -- Periodicals; 620.005
• DOI: 10.1016/j.eng.2020.05.020
• Languages: English
• ISSNs: 2095-8099

Abstract

Abstract: Owing to its high heat storage capacity and fast heat transfer rate, packed bed latent heat storage (LHS) is considered as a promising method to store thermal energy. In a packed bed, the wall effect can impact the packing arrangement of phase change material (PCM) capsules, inducing radial porosity oscillation. In this study, an actual-arrangement-based three-dimensional packed bed LHS model was built to consider the radial porosity oscillation. Its fluid flow and heat transfer were analyzed. With different cylindrical sub-surfaces intercepted along the radial direction in the packed bed, the corresponding relationships between the arrangement of capsules and porosity oscillation were identified. The oscillating distribution of radial porosity led to a non-uniform distribution of heat transfer fluid (HTF) velocity. As a result, radial temperature distributions and liquid fraction distributions of PCMs were further affected. The effects of different dimensionless parameters (e.g., tube-to-capsule diameter ratio, Reynolds number, and Stefan number) on the radial characteristics of HTF and PCMs were discussed. The results showed that different diameter ratios correspond to different radial porosity distributions. Further, with an increase in diameter ratio, HTF velocity varies significantly in the near wall region while the non-uniformity of HTF velocity in the center region will decrease. The Reynolds and Stefan numbers slightly impact the relative velocity distribution of the HTF—while higher Reynolds numbers can lead to a proportional improvement of velocity, an increase in Stefan number can promote heat storage of the packed bed LHS system.