Study on the eccentric jet-flow characteristics induced by the opening regulation with a gate valve. (November 2021)

• Record Type: Journal Article
• Authors: Chen, De-sheng; Wang, Yong-xiang; Liu, Qi; Lin, Zhe; Zhu, Zu-chao; Mao, Wei
• Is Part Of: Proceedings of the Institution of Mechanical Engineers. Volume 235:Number 21(2021)
• Page Start: 5353
• Page End: 5364
• Publication Date: 2021-11
• Subjects: Eccentric jet-flow -- valve opening -- numerical simulation -- velocity eccentric ratio -- critical pipeline length; Mechanical engineering -- Periodicals; 621.05
• DOI: 10.1177/0954406221994889
• Languages: English
• ISSNs: 0954-4062

Abstract

Valve-induced flow characteristics were often concerned in many fluid transportation and control industries. In this paper, the eccentric jet-flow characteristics induced by a gate valve have been studied by considering the influence of valve opening regulation. The experimental setup of monitoring the downstream pressures along the pipeline was developed, and corresponding numerical simulation was employed. The downstream-monitoring pressure distribution caused by valve opening regulation was investigated to verify the flow simulation. The generation mechanism of eccentric jet-flow was revealed as a strong pressure gradient caused by the throttling effect at the valve throat. It was found that the eccentric jet-flow evolved in the pipeline was accompanied by shearing vortices, extremely under a small valve opening. The pressure and axial velocity distributions at various downstream cross-sections of the eccentric jet-flow evolving in the pipeline were analyzed. The axial velocities on four monitoring lines in downstream cross-sections were extracted, and the radial location of the maximum axial velocity was derived to assess the eccentric characteristics of jet-flow. A dimensionless parameter of velocity eccentric ratio was introduced to quantify the eccentric intensity of the evolving jet-flow in the downstream pipeline, and its correlation with the pipeline length could be adequately expressed by a natural decreasing exponential curve via fitting analysis. By virtue of that correlation, the critical pipeline length was proposed that can be used as the judgment to the terminal of the eccentric jet-flow evolving in the downstream pipeline. This study was helpful to characterize the valve-induced flow characteristics in scientific research and provide useful insight into fluid and mechanical engineering.