Long term creep closure of salt cavities. (March 2018)

• Record Type: Journal Article
• Authors: Cornet, Jan S.; Dabrowski, Marcin; Schmid, Daniel W.
• Is Part Of: International journal of rock mechanics and mining sciences. Volume 103(2018)
• Page Start: 96
• Page End: 106
• Publication Date: 2018-03
• Subjects: Cavity closure -- Rock salt -- Carreau model -- Viscous creep -- Pressure solution -- Dislocation creep; Rock mechanics -- Periodicals; Soil mechanics -- Periodicals; Mining engineering -- Periodicals; Roches, Mécanique des -- Périodiques; Sols, Mécanique des -- Périodiques; Technique minière -- Périodiques; 624.151305
• DOI: 10.1016/j.ijrmms.2018.01.025
• Languages: English
• ISSNs: 1365-1609

Abstract

Abstract: We quantify the long term creep closure of salt cavities under in-situ conditions. We use an incompressible Carreau viscosity model to treat combined dislocation and pressure solution creep of rock salt. We build three material models based on the published compilations of experimental data. Analytical expressions are given for the maximum closure velocity under combined pressure and shear loads in the far field. A non-linear finite element model is used to study the apparent viscosity around a circular hole. In the low stress regime, depending on the grain size, creep rate can increase several orders of magnitude by the action of pressure solution. The influence of grain size dominates over all other parameters such as temperature or dislocation creep parameters. In general, pressure solution is dominant in cold fine-grained salts under low loads, while dislocation creep is dominant in warm coarse-grained salts under high loads. In the dislocation creep regime, the hole closure rate is n (stress exponent) times more sensitive to the far field shear stress than to the pressure differences. Significant hole closure can be reached in less than one day in very fine-grained salts under in-situ loads in the order of 1 MPa. A thorough understanding of salt grain size and water availability is needed to properly assess the relative contribution of dislocation and pressure solution creep in hole closure. A direct relationship relating grain size with deformation mechanism cannot be established in general. The closure of a cavity in a typical salt having a 10 mm grain size can either be dominated by pressure solution or dislocation creep depending on the temperature and salt type. Best practices to prevent hole closure include increasing hole pressure, and avoiding, when possible, the salt layers which are known to be fined-grained and under high deviatoric stress.