Thermal cycling performance of La2Ce2O7/50 vol.% YSZ composite thermal barrier coating with CMAS corrosion. Issue 7 (July 2018)

• Record Type: Journal Article
• Authors: Kang, Y.X.; Bai, Y.; Fan, W.; Yuan, T.; Gao, Y.; Bao, C.G.; Li, B.Q.
• Is Part Of: Journal of the European Ceramic Society. Volume 38:Issue 7(2018)
• Page Start: 2851
• Page End: 2862
• Publication Date: 2018-07
• Subjects: Thermal barrier coating -- CMAS -- CTE -- Fracture toughness -- Thermal cycling; Ceramic materials -- Periodicals; Composite materials -- Periodicals; Matériaux céramiques -- Périodiques; Composites -- Périodiques; Ceramic materials; Composite materials; Periodicals; Electronic journals; 666.05
• DOI: 10.1016/j.jeurceramsoc.2018.02.025
• Languages: English
• ISSNs: 0955-2219

Abstract

Abstract: La2 Ce2 O7 (LC) is receiving increasing attention due to its lower thermal conductivity, better phase stability and higher sintering resistance than yttria partially stabilized zirconia (YSZ). However, the low fracture toughness and the sudden drop of CTE at approximately 350 °C greatly limit its application. In this study, the LC/50 vol.% YSZ composite TBC was deposited by supersonic atmospheric plasma spraying (SAPS). Compared to YSZ or double layered LC/YSZ coating, the thermal cycling life of LC/50 vol.% YSZ coating with CMAS attack increased by 93% or 91%. The latter possessed higher fracture toughness (1.48 ± 0.26 MPa m 1/2 ) than LC (0.72 ± 0.15 MPa m 1/2 ) and better CMAS corrosion resistance than YSZ owing to the formation of Ca2 (Lax Ce1-x )8 (SiO4 )6 O6–4x with <001> orientation perpendicular to the coating surface. The sudden CTE decrease of LC was fully suppressed in LC/50 vol.% YSZ coating due to the change of temperature dependent residual stresses induced by YSZ.