Evaluation of the deteriogenic microbial community using qPCR, n-alkanes and FAMEs biodegradation in diesel, biodiesel and blends (B5, B10, and B50) during storage. (1st December 2018)

• Record Type: Journal Article
• Authors: Bücker, Francielle; de Moura, Tiane Martin; da Cunha, Michele Espinosa; de Quadros, Patricia Dörr; Beker, Sabrina Anderson; Cazarolli, Juciana Clarice; Caramão, Elina Bastos; Frazzon, Ana Paula Guedes; Bento, Fátima Menezes
• Is Part Of: Fuel. Volume 233(2018)
• Page Start: 911
• Page End: 917
• Publication Date: 2018-12-01
• Subjects: Microbial contamination -- Fuel biodeterioration -- Alkane-degrading bacteria, GC/qMS -- Storage tank; Fuel -- Periodicals; Coal -- Periodicals; Coal; Fuel; Periodicals; 662.6
• DOI: 10.1016/j.fuel.2017.11.076
• Languages: English
• ISSNs: 0016-2361

Abstract

Highlights: Microbial growth (biofilm) at oil/water interface was monitored by qPCR approach. qPCR showed that the fuel biofilm was composed mainly by fungi. B100 and B50 showed the highest microbial growth (biofilm) at the oil-water interface. The highest n-alkane biodegradation occurred in the B50 and B10 blends. The highest biodegradation of biodiesel fatty acid esters occurred in the B5 blend. Abstract: Understanding the changes in microbial community structure and its impact during the storage of diesel and biodiesel is critical to prevent damage to the system and to ensure a good quality product to consumers. In this study, the storage of pure diesel (B0), diesel and biodiesel blends (B5, B10, and B50), and pure biodiesel (B100) was simulated. During the simulation, and after contamination with inoculum, microbial growth was monitored through biomass formation. Fungi and bacteria were quantified by qPCR. The effect of contamination on the biodegradation of fatty acid methyl esters (FAMEs) and n-alkanes was assessed by GC/qMS. After 60 days of incubation, B100 and B50 had the highest biomass production at the oil-water interface. Microorganism abundance was estimated by the amplification of 16S rRNA and 18S rRNA genes using qPCR. The fungal population formed at the oil-water interface was larger than the bacterial population, in all treatments. The abundance of bacteria with the alkB gene found in the blends was one or two orders of magnitude higher than that of the total bacteria estimated. The highest biodegradation rates of the C16:0, C18:0, C18:1 cis and C18:2 FAMEs (25.5, 17.5%, 34.5%, and 27.7%, respectively) occurred in the B5 blend. The highest n-alkane degradation occurred in the B50 and B10 blends. The n-alkanes C20, C18, C15, C14, and C13 had 72.1%, 57.1%, 18.5%, 21.8%, and 19.6% degradation in B50, respectively. The n-alkanes C19, C12, and C10 had 61.3%, 6.9%, and 22.97% degradation in B10, respectively. The results indicate that knowledge about the microbial contamination of fuels is important for a correct management and to reduce the associated economic losses.