Influence of inlet pressure and rotational speed on the performance of high pressure single screw expander prototype. (15th March 2018)

• Record Type: Journal Article
• Authors: Li, Guoqiang; Lei, Biao; Wu, Yuting; Zhi, Ruiping; Zhao, Yingkun; Guo, Zhiyu; Liu, Guangyu; Ma, Chongfang
• Is Part Of: Energy. Volume 147(2018)
• Page Start: 279
• Page End: 285
• Publication Date: 2018-03-15
• Subjects: High pressure single screw expander -- Inlet pressure -- High pressure energy recovery -- Shaft efficiency; Power resources -- Periodicals; Power (Mechanics) -- Periodicals; Energy consumption -- Periodicals; 333.7905
• DOI: 10.1016/j.energy.2018.01.034
• Languages: English
• ISSNs: 0360-5442

Abstract

Abstract: To recover high pressure energy in a letdown station, a high pressure single screw expander (HPSSE) with 117 mm diameter is developed in our laboratory recently. This study presents the results of an experimental survey on the performance of HPSSE under varied inlet pressure and rotational speed. The inlet pressure of HPSSE ranges from 1.0 MPa to 5.0 MPa and the rotational speed is from 1500 rpm to 3000 rpm. The experimental results show that when the inlet pressure is 5.0 MPa, the maximum power output, volumetric efficiency, isentropic efficiency and shaft efficiency of HPSSE are 56.55 kW, 80.57%, 62.55% and 50.96%, respectively. The volumetric efficiency is immensely affected by inlet pressure under fairly slow rotational speed and a slight change in volumetric efficiency is observed under considerably high rotational speed. A high rotational speed is an effective method to reduce leakage in large pressure difference working conditions. Highlights: A high pressure single screw expander with 117 mm diameter screw was developed. The maximum inlet pressure of the prototype was up to 5.0 MPa. The maximum volumetric efficiency achieved 80.57% at 3000 rpm and 5.0 MPa. The maximum shaft efficiency achieved 50.96% at inlet pressure of 5.0 MPa.