Behaviour of steel-CFRP lap joints under hygrothermal cycles and sustained loadings. (1st November 2018)

• Record Type: Journal Article
• Authors: Hartanto, David; Hamed, Ehab; Agarwal, Ankit; Foster, Stephen J.
• Is Part Of: Composite structures. Volume 203(2018)
• Page Start: 740
• Page End: 749
• Publication Date: 2018-11-01
• Subjects: Creep -- Durability -- Fibre-reinforced plastic (FRP) -- Hygrothermal -- Lap joints; Composite construction -- Periodicals; Composites -- Périodiques; 624.18
• DOI: 10.1016/j.compstruct.2018.07.032
• Languages: English
• ISSNs: 0263-8223

Abstract

Abstract: The long term durability of FRP repaired steel structures is crucial for their safe use and effective design. Past studies that investigated the durability of steel-FRP single lap joints have focused on their response under extreme temperature and curing conditions, but without representing the actual on-site conditions for typical civil engineering applications. This paper presents an experimental investigation into the effects of hygrothermal cycles and sustained loading on steel-CFRP bonded lap joints under typical environmental conditions. A total of 72 lap joints were exposed to five hygrothermal cycles and sustained loading conditions. Specimens that survived the long-term loading were immediately tested to failure for evaluating their residual strength. The temperature cycles ranged from 15 °C to 50 °C and the relative humidity ranged between 40 and 70% under different combinations. These practical ranges of hygrothermal cycles were combined with practical curing temperatures and curing times. Sustained loads that equal to 30% and 50% of the failure loads were also applied. The results show that exposure to hygrothermal conditions only has little impact on the bonding strength. However, when hygrothermal and sustained loading were applied simultaneously, the bond strength of the lap joints was significantly affected in some circumstances.