Synthesis of clay‐armored coatable sulfonated polyimide nanocomposites as robust polyelectrolyte membranes. Issue 40 (25th June 2021)

• Record Type: Journal Article
• Authors: Ali, Nisar; Ali, Farman; Said, Amir; Khurshid, Sania; Sheikh, Zeshan Ali; Ali, Usman; Nguyen‐Tri, Phuong; Bilal, Muhammad
• Is Part Of: Journal of applied polymer science. Volume 138:Issue 40(2021)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2021-06-25
• Subjects: clay -- composites -- non‐polymeric materials and composites; Polymers -- Periodicals; Polymerization -- Periodicals; 668.9
• DOI: 10.1002/app.51310
• Languages: English
• ISSNs: 0021-8995

Abstract

Abstract: Herein, coatable sulfonated polyimide (SPI) and clay‐reinforced SPI membranes SPI‐clay 3%, SPI‐clay 5%, and SPI‐clay 7% were successfully fabricated by one‐step high temperature via direct imidization method. The membranes were cast as a coatable thin film using a solution casting method and grafted vermiculite clay nanoparticle were incorporated into the neat SPI as reinforcement by the sonication method. Three different formulated nanocomposite membranes were investigated using different characterization techniques such as Fourier transform infrared spectroscopy as peaks at 1166 and 1227 cm −1 confirmed successful sulfonation. In Proton ( 1 H) NMR synthesis of SPI confirmed as aromatic proton at 7.3–8.8 ppm depicts successful sulfonation and X‐ray diffraction results confirmed the crystalline structure of clay, as its content increased (7%) clear diffraction peak arises at 6 and 25°. Scanning electron microscopy (SEM) provides information about surface morphology of clay reinforced SPI membranes, and SEM micrographs shown uniform dispersion of clay nanofillers and developed easy transfer of electron. Thermogravimetric analysis was performed to investigate the thermal stability of synthesized films, results of thermographs shown degradation in the range of 510–600°C. Different physicochemical parameters employed and their results show the effectiveness of synthesized clay reinforced SPI membranes. Water uptake (WU%) about 0.96%, hydrolytic about 98 h and oxidative stability up to 80°C, ions exchange capacity about 3.16 mmol/g for synthesized clay reinforced SPI membranes. Measurement regarding Dimensional changes was also investigated and dimensional changes (1.557 ∆t/∆l). All these results reveal that the clay‐reinforced coatable SPI membranes are a promising material for polymer electrolyte membranes to be used in fuel cell energy applications. Abstract :