Thermal cycling behavior of EB-PVD rare earth oxides co-doping ZrO2-based thermal barrier coatings. Issue 16 (15th August 2021)

• Record Type: Journal Article
• Authors: Zhen, Zhen; Wang, Xin; Shen, Zaoyu; Mu, Rende; He, Limin; Xu, Zhenhua
• Is Part Of: Ceramics international. Volume 47:Issue 16(2021)
• Page Start: 23101
• Page End: 23109
• Publication Date: 2021-08-15
• Subjects: Rare earth oxides -- Ceramics -- TBCs -- EB-PVD -- Spallation failure; Ceramics -- Periodicals; Céramique industrielle -- Périodiques; Ceramics; Periodicals; Electronic journals; 666
• DOI: 10.1016/j.ceramint.2021.05.023
• Languages: English
• ISSNs: 0272-8842

Abstract

Abstract: Novel ceramic topcoat of Gd2 O3 –Yb2 O3 –Y2 O3 co-stabilized ZrO2 (GYbYSZ) thermal barrier coatings were fabricated via EB-PVD technique. The phase structural stability, phase constituent, chemical composition, morphology and cyclic oxidation of the thermal barrier coatings (TBCs) were systematically studied. Based on the XRD results, the GYbYSZ ceramics has not undergone phase transformation upon long-term annealing at 1373 K and 1523 K. Although the chemical content of the GYbYSZ ceramic coat deviates from the stoichiometric value, the coating is mostly composed of cubic phase, which is accord with the XRD pattern of the original ingot. A pyramidal-like morphology appears in the microtexture of the column tips and the measured diameters of the pyramids are about 2.5~4 μm. After thermal cycling, the surface of the coating presents a multi-layer structure, which is followed by layer-by-layer spallation. The failure zone of the ceramic coats is possible to occur the interior of the thermally grown oxide (TGO) layer, or within the top ceramic coat at the interface of bond coat/TGO layers. The degradation of GYbYSZ TBCs is primarily attributed to the accumulation and relaxation of residual stress, propagation of vertical through microcracks, the growth rumpling of TGO layer, the ridges of grain boundary and the abnormal oxidation of bond coat.