The significance of octane numbers to drive cycle fuel efficiency. (15th October 2021)

• Record Type: Journal Article
• Authors: Zhou, Zhenbiao; Kar, Tanmay; Yang, Yi; Brear, Michael; Leone, Thomas G.; Anderson, James E.; Shelby, Michael H.; Curtis, Eric; Lacey, Joshua
• Is Part Of: Fuel. Volume 302(2021)
• Publication Date: 2021-10-15
• Subjects: CR compression ratio -- FC Fuel consumption -- ISFC Indicated specific fuel consumption -- KLFC Fuel consumption at knock-limited operating conditions -- KLFEL Knock-limited fuel efficiency loss -- MBT Maximum brake torque -- MON Motor octane number -- OI Octane index -- PRF Primary reference fuel -- RON Research octane number -- S Octane sensitivity -- SI Spark-ignition -- SUV sports utility vehicle; Octane number -- Octane index -- Fuel efficiency -- Engine knock -- Drive cycle test; Fuel -- Periodicals; Coal -- Periodicals; Coal; Fuel; Periodicals; 662.6
• DOI: 10.1016/j.fuel.2021.121095
• Languages: English
• ISSNs: 0016-2361

Abstract

Highlights: Knock-limited fuel consumptions of a mid-size SUV determined for 5 drive cycles. US06 cycle and SAE tow tests more knock limited than UDDS and HWFET cycles. Distribution of the K-factor in the Octane Index model determined for these cycles. Significance of RON and MON to drive cycle fuel efficiency quantified via K. Higher RON improving drive cycle fuel efficiency much more than lower MON. Abstract: Modern spark-ignition engines are knock-limited over a significant fraction of their operating map. The efficiency loss induced by knock mitigation depends on both the fuel octane quality and driving conditions. This paper quantifies the relevance of the Research Octane Number (RON) and Motor Octane Number (MON) to the knock-limited fuel efficiency losses (KLFEL) of a mid-size sports utility vehicle operated in several standard drive cycles. The Octane Index model, OI = (1-K)·RON + K·MON, is used with K as the weighting factor to evaluate the relative importance of RON and MON. The K-map recently obtained for a gasoline turbocharged direction-injection engine (Zhou et al., Fuel 290 (2021) 120012) is used to determine the K distribution in these drive cycles. The analysis shows that the engine is not significantly limited by knock in the city and highway cycles. However, knock becomes a major constraint under more aggressive driving conditions such as in the US06 cycle and the hot-weather towing tests, where approximately 70% of fuel consumption occurs under knock-limited conditions and the KLFEL accounts for up to 6.3% of total fuel consumption. Among the drive cycles studied, the KLFEL-weighted K ranges from −0.44 to +0.12, indicating that increasing RON would significantly improve fuel efficiency and decreasing MON would have only a minor effect.