Effect of substrate ratios on the simultaneous carbon, nitrogen, sulfur and phosphorous conversions in microbial fuel cells. Issue 6 (June 2021) - Tariq, Madiha
Abstract: The columbic efficiency, removal efficiency and voltage production of seven different combinations of carbon (acetic acid, albumin and sucrose) with nutrients (C:N, C:P, C:S, C:N:S, C:P:S, C:N:P and C: N:S:P) were investigated at three different ratios (20:1, 15:1 and 10:1). The effects of various pH values were also explored for these combinations of carbon, and sulfur compounds (pH 6–8). The highest columbic efficiency (75.8%), COD removal efficiency (86%) and voltage (667 mV) were recorded when the acetic acid was used in the MFC and the lowest columbic efficiency (12.8%), removal efficiency (37.6%) and voltage (145 mV) were observed in case of albumin. A marked increase in columbic efficiency, removal efficiency and voltage production were seen with the rise in the pH value from 6 to 8. The lowest columbic efficiency, removal efficiency and voltage production were seen at pH 6 and highest at pH 8. At each investigated pH, the highest removal efficiency, columbic efficiency, and voltage were found at substrate ratio of 20:1 while lower at 10:1. At all pH values, the carbon to nutrient ratios seemed to have followed a similar trend i.e., the COD removal efficiency, columbic efficiency and voltage generation was found in the order C:N > C:N:S > C:N:S:P > C:N:P > C:S > C:P:S > C:P. In all cases, nitrogen showed a higher removal as compared to phosphorous and sulfur. Highlights: The effect of substrate ratios on the voltage production in MFC was investigated. Substrate ratios studied at three pH values (6~8). The best performance was noted for acetic acid as a substrate. The performance of MFC had linear relation with rising pH. Nitrogen showed higher removal as compared to phosphorous and sulfur removal. Abstract : Bioenergy; Columbic efficiency; Electronic equivalents; Substrate ratios; Voltage generation.