Evaluation of a roughness length parametrization accounting for wind–wave alignment in a coupled atmosphere–wave model. (15th December 2020)

• Record Type: Journal Article
• Authors: Porchetta, S.; Temel, O.; Warner, J.C.; Muñoz‐Esparza, D.; Monbaliu, J.; van Beeck, J.; van Lipzig, N.
• Is Part Of: Quarterly journal of the Royal Meteorological Society. Volume 147:Number 735(2021)
• Page Start: 825
• Page End: 846
• Publication Date: 2020-12-15
• Subjects: COAWST -- coupled atmosphere–wave model -- offshore power production -- roughness length parametrization -- vertical velocity profile -- wind–wave alignment; Meteorology -- Periodicals; 551.5
• DOI: 10.1002/qj.3948
• Languages: English
• ISSNs: 0035-9009

Abstract

Abstract: The importance of wind energy as an alternative energy source has increased over the latest years with more focus on offshore winds. A good estimation of the offshore winds is thus of major importance for this industry. Up to now the effect of the wind–wave (mis)alignment has not yet been taken into account in coupled atmosphere–wave models to study the vertical wind profile and power production estimations of offshore wind farms. In this study the roughness length parametrization of Drennan et al . in 2003, and its extension addressing the wind–wave (mis)alignment proposed by Porchetta et al . in 2019, are investigated in the Coupled Ocean–Atmosphere–Wave–Sediment Transport (COAWST) model. This study shows that the yearly mean wind estimation at hub height (100 m) is improved by the roughness length parametrization of Porchetta et al . compared to Drennan. This is mainly due to the increased roughness of the former parametrization compare to the latter, even in aligned wind–wave conditions. This difference in roughness is caused by the dataset used to obtain the constants, deep‐water conditions versus mixed offshore conditions. Moreover, the roughness length parametrization of Porchetta et al . performs better in two of three alignment categories. Furthermore, similar model performances are obtained if we exclude the wind directions from the wind shadow zone of the measurement mast or the wind directions from the recently built Alpha Ventus wind farm, which is in close vicinity of the measurement mast. Investigating different wind conditions shows that the new roughness length parametrization of Porchetta et al . performs best for both offshore and onshore winds. Additionally, we show that the coupled model estimations of the vertical wind are only slightly affected by significant wave height estimations. Similar model performances for different accuracies of significant wave height estimations are presented. One exception is the perpendicular alignment category where the new roughness length of Porchetta et al . outperforms the roughness length of Drennan when investigating the wind estimations related to significant wave heights with a higher accuracy. The roughness length parametrization of Porchetta et al . reduced the power production overestimation of the coupled model from 5.7 to 2.8%. We also show that the standalone atmospheric model including the roughness length of Charnock in 1955 has a degraded performance compared to the coupled model including the roughness length parametrization of Porchetta et al . for yearly average wind profiles. Abstract : The evaluation of a bulk roughness length parametrization accounting for wind–wave alignment in a coupled mesoscale atmosphere–wave model shows an improved wind estimation at typical hub height. Moreover, the power production estimation of an offshore wind turbine improves when this roughness length parametrization is included. This study was evaluated by wind and wave measurements taken at the FINO1 measurement mast, located in the North Sea.