Micro-mechanical modeling of irreversible hygroscopic strain in paper sheets exposed to moisture cycles. (1st August 2021)

• Record Type: Journal Article
• Authors: Samantray, P.; Peerlings, R.H.J.; Massart, T.J.; Geers, M.G.D.
• Is Part Of: International journal of solids and structures. Volume 224(2021)
• Publication Date: 2021-08-01
• Subjects: Fibrous network -- Hygro-mechanics -- Micro-mechanics -- Homogenisation; Mechanics, Applied -- Periodicals; Structural analysis (Engineering) -- Periodicals; Elastic solids -- Periodicals; Mécanique appliquée -- Périodiques; Constructions, Théorie des -- Périodiques; Solides élastiques -- Périodiques; Elastic solids; Mechanics, Applied; Structural analysis (Engineering); Periodicals; 624.18
• DOI: 10.1016/j.ijsolstr.2021.03.011
• Languages: English
• ISSNs: 0020-7683

Abstract

Abstract: Paper is a complex material consisting of a network of cellulose fibres at the micro-level. During manufacturing, the network is dried under restraint conditions due to tension in the paper web in machine direction. This gives rise to internal strains that are stored in the produced sheet. Upon exposure to a moisture cycle, these strains may be released. This results in permanent shrinkage that may cause instabilities such as curl or waviness of the sheet. The prime objective of this paper is to model this irreversible shrinkage and to link its magnitude to the properties of the fibres and of the network. For this purpose, randomly generated fibrous networks of different coverages (i.e. ratio of the area occupied by fibres and that of the sheet) are modeled by means of a periodic representative volume element (RVE). Within such RVEs, a finite element method combined with a kinematic hardening plasticity model at the scale of the fibres is used to capture the irreversible response. The computational results obtained demonstrate that the magnitude of the irreversible strains increases with coverage until a certain coverage and beyond that coverage decreases in magnitude. This phenomenon is explained by considering the area fraction of free-standing fibre segments relative to bonded fibre segments in the network. A structure–property dependency of irreversible strains at the sheet-level on the micro-structural parameters of the network is thereby established.