Behavior and mechanism of in-situ synthesis of auxiliary electrode for electrochemical sulfur sensor by calcium aluminate system. Issue 4 (March 2020)

• Record Type: Journal Article
• Authors: Wen, Tianpeng; Yu, Jingkun; Yuan, Lei; Jin, Endong; Liu, Tao; Tian, Chen; Zhou, Yuting
• Is Part Of: Ceramics international. Volume 46:Issue 4(2020)
• Page Start: 4256
• Page End: 4264
• Publication Date: 2020-03
• Subjects: Calcium aluminate -- Auxiliary electrode -- Mechanism -- Thermodynamics -- Kinetics; Ceramics -- Periodicals; Céramique industrielle -- Périodiques; Ceramics; Periodicals; Electronic journals; 666
• DOI: 10.1016/j.ceramint.2019.10.146
• Languages: English
• ISSNs: 0272-8842

Abstract

Abstract: The behavior and mechanism of in-situ synthesis of the auxiliary electrode for sulfur sensor were investigated in this work, aiming for better application of calcium aluminate system in synthesizing the auxiliary electrode used for sulfur sensor. The in-situ reaction experiment was developed. In addition, the thermodynamic and kinetic calculations were adopted to further study the in-situ reaction possibility and the reaction rate. The results indicated that the value of lg( a [S] / a [O] ) should be greater than a particular value to ensure the occurrence of the in-situ reaction. After immersion into the molten iron, the CaS phase was synthesized in the calcium aluminate system. The relationship between the reaction rate and reaction time was exponential, and the initial reaction rate was affected by the CaO content incorporated in the calcium aluminate system and the sulfur content in the molten iron. The initial in-situ reaction rate greatly increased with the increase of the CaO content and sulfur content. For example, the initial reaction rate was as high as 14.87 s -1 when the calcium aluminate system containing 60 wt% of CaO and for a sulfur content of 0.077 wt% in the molten iron. Moreover, the reason that the sulfur sensor fabricated by the ZrO2 (MgO) tube with the calcium aluminate coating with different components had the same response time when measuring the different sulfur contents in the molten iron was further explained.