A dynamic multi-objective optimization procedure for water cooling of a photovoltaic module. (June 2021)

• Record Type: Journal Article
• Authors: Shahverdian, Mohammad Hassan; Sohani, Ali; Sayyaadi, Hoseyn; Samiezadeh, Saman; Doranehgard, Mohammad Hossein; Karimi, Nader; Li, Larry K.B.
• Is Part Of: Sustainable energy technologies and assessments. Volume 45(2021)
• Publication Date: 2021-06
• Subjects: Photovoltaic (PV) technology -- Solar energy -- Multi-objective optimization -- Temperature control -- Water cooling; Renewable energy sources -- Periodicals; Energy development -- Technological innovations -- Periodicals; Electric power production -- Periodicals; Energy storage -- Periodicals; 333.79
• DOI: 10.1016/j.seta.2021.101111
• Languages: English
• ISSNs: 2213-1388

Abstract

Highlights: Considerable improvement compared to constant water flow (CWF) is obtained. Annual Energy increase and water consumption are 64.73 and 41.98% better than CWF. Average and peak temperature of PV are 16.63 and 17.37% lower than CWF in a year. Annual average temperature of PV falls 54.07% compared to no cooling condition. Difference between peak and average temperature of PV declines for all months. Abstract: Dynamic multi-objective optimization (DMOO) is implemented on a water-based cooling system to enhance the performance of a 50 W polycrystalline-based solar photovoltaic (PV) module. The DMOO is conducted under the climatic conditions of Tehran, Iran, with the aim of maximizing the power output while minimizing the amount of cooling water consumed. The results of the DMOO are compared against those of a no-cooling condition (NCC) and a constant water flow (CWF) condition of 0.1 LPM. Compared with CWF, DMOO is found to produce a 64.73% increase in the annual energy production and a 41.98% decrease in water usage over an entire year. Furthermore, compared to NCC, DMOO is able to reduce the average and maximum temperatures of the PV module by 54.07% and 61.02%, respectively in a year; these figures are 16.63% and 17.37% better than those of CWF. Moreover, on an annual basis, DMOO is found to reduce the difference between the average and maximum PV temperatures by 79.79% and 54.53% relative to NCC and CWF, respectively. This study shows that the performance of a PV module can be improved significantly by applying DMOO to its water-based cooling system.