An approach to determine radiative properties of solid struts of open-cell foams by pore scale identification from macro scale measurements. (June 2021)

• Record Type: Journal Article
• Authors: Li, Yang; Chen, Hong-Wei; Xia, Xin-Lin; Ma, Gui-Yang; Tan, He-Ping
• Is Part Of: International communications in heat and mass transfer. Volume 125(2021)
• Publication Date: 2021-06
• Subjects: Metal foam -- Solid strut -- Radiative property -- Pore level -- MCRT -- APSO; Heat -- Transmission -- Periodicals; Mass transfer -- Periodicals; Chaleur -- Transmission -- Périodiques; Transfert de masse -- Périodiques; Heat -- Transmission; Mass transfer; Periodicals; 621.4022
• DOI: 10.1016/j.icheatmasstransfer.2021.105290
• Languages: English
• ISSNs: 0735-1933

Abstract

Abstract: Open-cell foams consisting of interconnected struts are widely used in thermal applications such as volumetric solar receivers. The thermal performance of foams strongly relies on their radiative behaviors which intrinsically depends on the radiative properties of struts. This study proposed a feasible approach to determine the radiative properties of solid struts by a pore scale identification from a macro scale measurement. First, the normal-hemispherical transmittance and reflectance spectra of two nickel foams were measured by an experimental system. Second, a pore scale forward calculation was conducted by a combination of Monte Carlo Ray-tracing method and real foam structures obtained from micro-computed tomography technique. Last, an Adaptive Particle Swarm Optimization algorithm was adopted to retrieve the spectral reflectivity and specularity of nickel struts from the measured spectra. The results show that it is unreasonable to assume the reflection behavior of strut surface simply as either specular or diffused, and also, it is unreliable to assign the reflectivity of strut surface directly by Fresnel's law. Within the investigated wavebands 0.4–2.2 μm, the average reflectivity of nickel struts is 12% lower than that of a nickel mirror. The proportion of specular reflection at nickel strut surface is between 37%–52%, almost increasing with wavelengths. Graphical abstract: Unlabelled Image