High quality jatropha biodiesel (H-FAME) and its application in a common rail diesel engine. (December 2017) - Tongroon, Manida
Abstract: Depending on the guarantee from the original equipment manufacturers, the acceptable percentage of biodiesel used in diesel engines is limited. The low oxidation stability of biodiesel is the major challenge limiting its use. Therefore, improving the quality of biodiesel may be a promising approach to increasing the usage amount. In this study, high quality biodiesel from jatropha upgraded by partial hydrogenation of unsaturated fatty acid methyl ester (H-FAME) process, which reduced the polyunsaturated ester molecules, is introduced. The upgraded biodiesel significantly improved the oxidation stability. First, the properties of H-FAME were determined prior to its use in the engine. All properties satisfied the requirements of all biodiesel standards. Biodiesel content could improve the lubricity of petroleum diesel for application in a modern high pressure injection system. Then, the performance and emissions of a common rail diesel engine using 10% of H-FAME were investigated and compared with the commercial diesel. Finally, engine endurance was assessed by a 50, 000 km on-road durability test. The results showed that 10% of H-FAME slightly decreased engine torque and marginally improved fuel consumption. Exhaust gas emissions including CO, HC, NOX and smoke decreased. There was no sign of engine deterioration caused by the H-FAME. Highlights: High quality biodiesel (H-FAME) from partially hydrogenation process can dramatically increase oxidation stability. H-FAME can be used in a modern diesel engine with higher blend ratio than the limitation from the car manufacturer. H-FAME technology can be applied for all biodiesel derived from different feedstocks.