Effects of pressure and temperature on the effective thermal conductivity of oriented silicon steel iron core under atmospheric condition. (October 2018)

• Record Type: Journal Article
• Authors: Zhang, Rongzhao; Dou, Ruifeng; Wen, Zhi; Liu, Xunliang
• Is Part Of: International journal of heat and mass transfer. Volume 125(2018)
• Page Start: 780
• Page End: 787
• Publication Date: 2018-10
• Subjects: Heat conduction -- Effective axial thermal conductivity -- Transformer cores -- Multi-stacked material -- Contact pressure; Heat -- Transmission -- Periodicals; Mass transfer -- Periodicals; Chaleur -- Transmission -- Périodiques; Transfert de masse -- Périodiques; Electronic journals; 621.4022
• DOI: 10.1016/j.ijheatmasstransfer.2018.04.114
• Languages: English
• ISSNs: 0017-9310

Abstract

Highlights: The axial thermal conductivity is independent on lamination number. Effect of temperature on thermal conductivity is similar in loading and unloading. Effect of contact pressure is more prominent at loading process than unloading. Empirical correlation equation for axial thermal conductivity is proposed. Abstract: A set of experimental devices was designed and built to investigate the effects of average temperature of lamination, contact pressure, and lamination number on the effective axial thermal conductivity of silicon steel multi-stacked material in the loading and unloading processes under atmospheric environment. Specimens are stacked by oriented silicon steel sheets, the content of silicon is approximately 3.3%, and thickness is 0.23 mm. Average temperature is in the range of 200–800 °C, and contact pressure is between 0.16 and 16.68 MPa. Experimental results indicated that: effective axial thermal conductivity presented an obvious relationship with the average temperature and contact pressure of lamination but showed independence from the lamination number. Effective axial thermal conductivity is more sensitive to contact pressure in the loading process than in the unloading process. The correlation equations of effective axial thermal conductivity have an accuracy of 15%.