Potential of Soft-Shelled Rugby Headgear to Reduce Linear Impact Accelerations. (24th April 2021) - Draper, Nick
Abstract : The purpose of this study was to examine the potential of soft-shelled rugby headgear to reduce linear impact accelerations. A hybrid III head form instrumented with a 3-axis accelerometer was used to assess headgear performance on a drop test rig. Six headgear units were examined in this study: Canterbury Clothing Company (CCC) Ventilator, Kukri, 2 nd Skull, N-Pro, and two Gamebreaker headgear units of different sizes (headgears 1–6, respectively). Drop heights were 238, 300, 610, and 912 mm with 5 orientations at each height (forehead, front boss, rear, rear boss, and side). Impact severity was quantified using peak linear acceleration (PLA) and head injury criterion (HIC). All headgear was tested in comparison to a no headgear condition (for all heights). Compared to the no headgear condition, all headgear significantly reduced PLA and HIC at 238 mm (16.2–45.3% PLA and 29.2–62.7% HIC reduction; P < 0.0005, η p 2 = 0.987–0.991). Headgear impact attenuation lowered significantly as the drop height increased (32.4–5.6% PLA and 50.9–11.7% HIC reduction at 912 mm). There were no significant differences in PLA or HIC reduction between headgear units 1–3. Post hoc testing indicated that headgear units 4–6 significantly outperformed headgear units 1–3 and additionally headgear units 5 and 6 significantly outperformed headgear 4 (P < 0.05 ). The lowest reduction PLA and HIC was for impacts rear orientation for headgear units 1–4 (3.3 ± 3.6%–11 ± 5.8%). In contrast, headgear units 5 and 6 significantly outperformed all other headgear in this orientation (P < 0.0005, η p 2 = 0.982–0.990). Side impacts showed the greatest reduction in PLA and HIC for all headgear. All headgear units tested demonstrated some degree of reduction in PLA and HIC from a linear impact; however, units 4–6 performed significantly better than headgear units 1–3.