Laser cladding of bioactive glass coating on pure titanium substrate with highly refined grain structure. (July 2021)

• Record Type: Journal Article
• Authors: Bajda, Szymon; Liu, Yijun; Tosi, Riccardo; Cholewa-Kowalska, Katarzyna; Krzyzanowski, Michal; Dziadek, Michal; Kopyscianski, Mateusz; Dymek, Stanislaw; Polyakov, Alexander V.; Semenova, Irina P.; Tokarski, Tomasz
• Is Part Of: Journal of the mechanical behavior of biomedical materials. Volume 119(2021)
• Publication Date: 2021-07
• Subjects: Laser cladding -- Ultrafine-grained structure -- Pure titanium -- Bioactive glass -- Numerical analysis -- In vitro; Biomedical materials -- Periodicals; Biomedical materials -- Mechanical properties -- Periodicals; Biomedical materials; Biomedical materials -- Mechanical properties; Periodicals; Electronic journals; 610.28
• DOI: 10.1016/j.jmbbm.2021.104519
• Languages: English
• ISSNs: 1751-6161

Abstract

Abstract: Free from toxic elements biomaterial potentially applicable for load bearing biomedical implants was obtained for the first time by laser cladding of S520 bioactive glass onto ultrafine-grained commercially pure titanium. The cladding process affected the refined structure of the substrate inducing martensitic transformation near its surface. The α' acicular martensite gradually passes into relatively large grains with increasing distance from the substrate surface, which subsequently are transformed into smaller grains of about 2 μm in diameter. Both the melted zone, where the martensite crystalline structure was found, and the HAZ are characterised by relatively lower hardness in comparison with that of the substrate core indicating increased ductility. Such a combination of zones with different properties may have a synergistic effect and is beneficial for the obtained biomaterial. A characteristic region in the form of about 3 μm width band was formed in the melted zone at about 10 μm below the titanium surface. The results of EDS analysis indicate that several glass elements moved into the region while the titanium content in the same area was decreased. High bioactivity of the coated S520 glass was revealed by in vitro testing with SBF solution and almost complete reduction of P concentration occurred after 14 days. Graphical abstract: Image 1 Highlights: laser cladding was used for coating of bioactive glass on ultrafine-grained titanium. Free from potentially toxic elements biomaterial for implants was obtained. The areas of relatively high plasticity were found below the cladded material. High bioactivity of bioactive glass coating was observed.