Nonlinear model predictive control of organic Rankine cycles for automotive waste heat recovery: Is it worth the effort?. (March 2021)

• Record Type: Journal Article
• Authors: Vaupel, Yannic; Schulze, Jan C.; Mhamdi, Adel; Mitsos, Alexander
• Is Part Of: Journal of process control. Volume 99(2021)
• Page Start: 19
• Page End: 27
• Publication Date: 2021-03
• Subjects: Advanced model-based control -- Dynamic optimization -- Minimal superheat -- Feed-forward control; Process control -- Periodicals; Fabrication -- Contrôle -- Périodiques; Process control; Periodicals; Electronic journals; 660.281
• DOI: 10.1016/j.jprocont.2021.01.003
• Languages: English
• ISSNs: 0959-1524

Abstract

Abstract: Using organic Rankine cycles (ORC) for waste heat recovery in vehicles promises significant reductions in fuel consumption. Controlling the organic Rankine cycle, however, is difficult due to the highly transient exhaust gas conditions. To tackle this issue, nonlinear model predictive control (NMPC) has been proposed and approximate NMPC solutions have been investigated to reduce computational demand. Herein, we compare (i) an idealized economic NMPC (eNMPC) scheme as a benchmark to (ii) a NMPC enforcing minimal superheat and (iii) a PI controller with dynamic feed-forward term (PI-ff) in a control case study with highly transient disturbances. We show that, for an ORC system with supersonic turbine, the economic control problem can be reduced to a single-input single-output superheat tracking problem combined with a decoupled steady-state real-time optimization (RTO) of turbine operation, assuming an idealized condenser. Our results indicate that the NMPC enforcing minimal superheat provides good control performance with negligible losses in average power compared to the full solution of the economic NMPC problem and that even PI-ff only results in marginal losses in average power compared to the model-based controllers. Highlights: Control of organic Rankine cycles for automotive waste heat recovery is investigated. An eNMPC, a tracking NMPC and a PI controller with feedforward term are implemented. The optimal control problem is reduced to a SISO tracking problem with decoupled RTO. Operation under PI controller results only in marginally smaller power production.