Performance testing of dosimeters used in interventional radiology: Results from the VERIDIC project. (February 2021)

• Record Type: Journal Article
• Authors: Kržanović, Nikola; Blideanu, Valentin; Ciraj-Bjelac, Olivera; Plagnard, Johann; Schoonjans, Werner; Živanović, Miloš; Dabin, Jérémie
• Is Part Of: Radiation measurements. Volume 141(2020:Oct.)
• Publication Date: 2021-02
• Subjects: Diagnostic radiology -- Dosimetry -- Interventional cardiology -- Radiation quality -- X-rays; Nuclear emulsions -- Periodicals; Particle tracks (Nuclear physics) -- Periodicals; Thermoluminescence -- Periodicals; Cosmic rays -- Periodicals; Radiation -- Measurement -- Periodicals; Radiometry -- Periodicals; Radiation Monitoring -- Periodicals; Émulsions nucléaires -- Périodiques; Particules (Physique nucléaire) -- Traces -- Périodiques; Thermoluminescence -- Périodiques; Rayonnement cosmique -- Périodiques; Radiométrie -- Périodiques; 539.77
• DOI: 10.1016/j.radmeas.2021.106515
• Languages: English
• ISSNs: 1350-4487

Abstract

Abstract: Interventional procedures in radiology and cardiology are associated with high dose to the patient. Accurate dosimetry is essential and calibration of the equipment is a means to provide the necessary accuracy of dose assessment. The objective of this work is to investigate the performance of dosimeters used in interventional procedures in different standard and non-standard X-ray radiation qualities, and to investigate potential uncertainties related to dose measurements, thus improving accuracy of patient dosimetry in interventional procedures. Four new reference radiation qualities dedicated to interventional cardiology applications have been established, allowing calibration of dosimeters used in clinical conditions with appropriate traceability to primary standards. Testing of solid-state semiconductor detectors and thermoluminescent dosimeter properties, e.g. influence of photon energy, angle of incidence and dose rate, was performed in the standard and non-standard radiation qualities. Both dosimeter types showed good performance in the non-standard beams during all performance tests. Solid-state dosimeters displayed weak dependence on energy, angle of incidence and dose rate, in the range defined by the manufacturer and requirements of the international standard. Thermoluminescent dosimeters displayed excellent linearity and angular dependence. The influence of energy dependence on measurement uncertainty can be reduced if appropriate radiation quality is selected for calibration. Highlights: Interventional procedures in diagnostic radiology are not covered by standard radiation qualities. Non-standard radiation qualities were established related to clinical conditions. Behaviour of solid-state semiconductor and thermoluminescent dosimeters was tested. Measurement uncertainty in dosimetry in interventional procedures was improved.