Angle defines attachment: Switching the biological response to titanium interfaces by modifying the inclination angle during selective laser melting. (15th September 2018)

• Record Type: Journal Article
• Authors: Sarker, Avik; Tran, Nhiem; Rifai, Aaqil; Elambasseril, Joe; Brandt, Milan; Williams, Richard; Leary, Martin; Fox, Kate
• Is Part Of: Materials & design. Volume 154(2018)
• Page Start: 326
• Page End: 339
• Publication Date: 2018-09-15
• Subjects: Additive manufacturing -- Selective laser melting -- Inclination angle -- Cell attachment -- Biomedical implant; Materials -- Periodicals; Engineering design -- Periodicals; Matériaux -- Périodiques; Conception technique -- Périodiques; Electronic journals; 620.11
• DOI: 10.1016/j.matdes.2018.05.043
• Languages: English
• ISSNs: 0264-1275

Abstract

Abstract: Developing patient-specific biomedical implants for clinical application requires the integration of material science, manufacturing engineering, and biology. As selective laser melted (SLM) metallic additive manufactured implants become common, a key, but overlooked design parameter is its inclination angle. In this study, we have fabricated Ti6Al4V implants at three different inclination angles (0, 45 and 90 degrees) reporting the relationship between cell attachment, surface topography and surface chemistry at each angle. During the SLM process, we show that as the inclination angles increase, there is a corresponding increase in the number of partially melted particles adhering to the surface, greatly affecting the surface topography, morphology, roughness, chemistry, and wettability of the implant. In order to validate the approach, the effect of surface properties on cell fate was determined. In each case, the overall viability of Chinese hamster ovarian cells (CHO) was found to be statistically indistinguishable; however, the number of spindle cells and their dimension were found to increase significantly at higher inclination angles. This work demonstrates a novel approach for combining SLM technology in manufacturing metallic biomedical implants and provides a novel insight in case of switching cell‑titanium interface by modifying one process parameter, inclination angle, during rapid prototyping process. Graphical abstract: Selective Laser Melting (SLM), a powder bed fusion technology which has been applied for building different inclined Ti6Al4V part fabrication for biomedical implant. Ti6Al4V SLM part built with higher inclination angle such as 90 degrees revealing the rough surface texture adhering the higher amount of partially melted particles has greatly influenced the increasing the number of spindle cells and their dimension with less amount of spheriodal cells. Unlabelled Image Highlights: Ti6Al4V implants were successfully fabricated with different inclinations (0, 45 and 90 degrees). Partially melted particles adhering to the surface affect implant surface topography, morphology, roughness, and wettability. Matlab program was developed for counting the cells type on different inclined surface. Spindle cell number was found to increase at higher inclination angles (90 degrees). Minimal surface treatment required if the inclination angle is used to develop the implant surface.