Quick high-temperature hydrothermal synthesis of mesoporous materials with 3D cubic structure for the adsorption of lysozyme. Issue 2 (28th April 2015)

• Record Type: Journal Article
• Authors: Lawrence, Geoffrey; Baskar, Arun V; El-Newehy, Mohammed H; Cha, Wang Soo; Al-Deyab, Salem S; Vinu, Ajayan
• Is Part Of: Science and technology of advanced materials. Volume 16:Issue 2(2015)
• Publication Date: 2015-04-28
• Subjects: mesoporous -- nanoporous -- adsorption; Materials -- Technological innovations -- Periodicals; 620.112
• DOI: 10.1088/1468-6996/16/2/024806
• Languages: English
• ISSNs: 1468-6996

Abstract

Abstract: Three-dimensional cage-like mesoporous FDU-12 materials with large tuneable pore sizes ranging from 9.9 to 15.6 nm were prepared by varying the synthesis temperature from 100 to 200 °C for the aging time of just 2 h using a tri-block copolymer F-127(EO106 PO70 EO106 ) as the surfactant and 1, 3, 5-trimethyl benzene as the swelling agent in an acidic condition. The mesoporous structure and textural features of FDU-12-HX (where H denotes the hydrothermal method and X denotes the synthesis temperature) samples were elucidated and probed using x-ray diffraction, N2 adsorption, 29 Si magic angle spinning nuclear magnetic resonance, scanning electron microscopy and transmission electron microscopy. It has been demonstrated that the aging time can be significantly reduced from 72 to 2 h without affecting the structural order of the FDU-12 materials with a simple adjustment of the synthesis temperature from 100 to 200 °C. Among the materials prepared, the samples prepared at 200 °C had the highest pore volume and the largest pore diameter. Lysozyme adsorption experiments were conducted over FDU-12 samples prepared at different temperatures in order to understand their biomolecule adsorption capacity, where the FDU-12-HX samples displayed high adsorption performance of 29 μ mol g −1 in spite of shortening the actual synthesis time from 72 to 2 h. Further, the influence of surface area, pore volume and pore diameter on the adsorption capacity of FDU-12-HX samples has been investigated and results are discussed in correlation with the textural parameters of the FDU-12-HX and other mesoporous adsorbents including SBA-15, MCM-41, KIT-5, KIT-6 and CMK-3.