Improving computational fluid dynamics modeling of Direct Injection Spark Ignition cold-start. (September 2021) - Ravindran, Arun C
Developing a profound understanding of the combustion characteristics of the cold-start phase of a Direct Injection Spark Ignition (DISI) engine is critical to meeting increasingly stringent emissions regulations. Computational Fluid Dynamics (CFD) modeling of gasoline DISI combustion under normal operating conditions has been discussed in detail using both the detailed chemistry approach and flamelet models (e.g. the G-Equation). However, there has been little discussion regarding the capability of the existing models to capture DISI combustion under cold-start conditions. Accurate predictions of cold-start behavior involves the efficient use of multiple models - spray modeling to capture the split injection strategies, models to capture the wall-film interactions, ignition modeling to capture the effects of retarded spark timings, combustion modeling to accurately capture the flame front propagation, and turbulence modeling to capture the effects of decaying turbulent kinetic energy. The retarded spark timing helps to generate high heat flux in the exhaust for the faster catalyst light-off during cold-start. However, the adverse effect is a reduced turbulent flame speed due to decaying turbulent kinetic energy. Accordingly, developing an understanding of the turbulence-chemistry interactions is imperative for accurate modeling of combustion under cold-start conditions. In the present work, combustion characteristics during the cold-start, fast-idle phase is modeled using the G-Equation flamelet model and the RANS turbulence model. The challenges associated with capturing the turbulent-chemistry interactions are explained by tracking the flame front travel along the Borghi-Peters regime diagram. In this study, a modified version of the G-Equation combustion model for capturing cold-start flame travel is presented.