An automatic granular structure generation and finite element analysis of heterogeneous semi-solid materials. (11th August 2015)

• Record Type: Journal Article
• Authors: Sharifi, Hamid; Larouche, Daniel
• Is Part Of: Modelling and simulation in materials science and engineering. Volume 23:Number 6(2015)
• Publication Date: 2015-08-11
• Subjects: mesh generation -- microstructure generation -- granular model -- solidification model -- semi-solid model; Materials -- Mathematical models -- Periodicals; Matériaux -- Modèles mathématiques -- Périodiques; Materials -- Mathematical models; Periodicals; 620.00113
• DOI: 10.1088/0965-0393/23/6/065013
• Languages: English
• ISSNs: 0965-0393

Abstract

Abstract: The quality of cast metal products depends on the capacity of the semi-solid metal to sustain the stresses generated during the casting. Predicting the evolution of these stresses with accuracy in the solidification interval should be highly helpful to avoid the formation of defects like hot tearing. This task is however very difficult because of the heterogeneous nature of the material. In this paper, we propose to evaluate the mechanical behaviour of a metal during solidification using a mesh generation technique of the heterogeneous semi-solid material for a finite element analysis at the microscopic level. This task is done on a two-dimensional (2D) domain in which the granular structure of the solid phase is generated surrounded by an intergranular and interdendritc liquid phase. Some basic solid grains are first constructed and projected in the 2D domain with random orientations and scale factors. Depending on their orientation, the basic grains are combined to produce larger grains or separated by a liquid film. Different basic grain shapes can produce different granular structures of the mushy zone. As a result, using this automatic grain generation procedure, we can investigate the effect of grain shapes and sizes on the thermo-mechanical behaviour of the semi-solid material. The granular models are automatically converted to the finite element meshes. The solid grains and the liquid phase are meshed properly using quadrilateral elements. This method has been used to simulate the microstructure of a binary aluminium–copper alloy (Al–5.8 wt% Cu) when the fraction solid is 0.92. Using the finite element method and the Mie–Grüneisen equation of state for the liquid phase, the transient mechanical behaviour of the mushy zone under tensile loading has been investigated. The stress distribution and the bridges, which are formed during the tensile loading, have been detected.