Analytical methods to characterize heterogeneous raw material for thermal spray process: cored wire Inconel 625. Issue 1 (March 2016)

• Record Type: Journal Article
• Authors: Lindner, T; Bonebeau, S; Drehmann, R; Grund, T; Pawlowski, L; Lampke, T
• Is Part Of: IOP conference series. Volume 118:Issue 1(2016)
• Publication Date: 2016-03
• Subjects: Inconel 625 -- Chemical analyzes -- Arc spray -- Coating -- Cored wire; Materials science -- Periodicals; 620.1105
• DOI: 10.1088/1757-899X/118/1/012009
• Languages: English
• ISSNs: 1757-8981

Abstract

Abstract: In wire arc spraying, the raw material needs to exhibit sufficient formability and ductility in order to be processed. By using an electrically conductive, metallic sheath, it is also possible to handle non-conductive and/or brittle materials such as ceramics. In comparison to massive wire, a cored wire has a heterogeneous material distribution. Due to this fact and the complex thermodynamic processes during wire arc spraying, it is very difficult to predict the resulting chemical composition in the coating with sufficient accuracy. An Inconel 625 cored wire was used to investigate this issue. In a comparative study, the analytical results of the raw material were compared to arc sprayed coatings and droplets, which were remelted in an arc furnace under argon atmosphere. Energy-dispersive X-ray spectroscopy (EDX) and X-ray fluorescence (XRF) analysis were used to determine the chemical composition. The phase determination was performed by X-ray diffraction (XRD). The results were related to the manufacturer specifications and evaluated in respect to differences in the chemical composition. The comparison between the feedstock powder, the remelted droplets and the thermally sprayed coatings allows to evaluate the influence of the processing methods on the resulting chemical and phase composition.