Qualification of electron-beam welded joints between copper and stainless steel for cryogenic application. Issue 1 (November 2015)

• Record Type: Journal Article
• Authors: Lusch, C; Borsch, M; Heidt, C; Magginetti, N; Sas, J; Weiss, K-P; Grohmann, S
• Is Part Of: IOP conference series. Volume 102:Issue 1(2015)
• Publication Date: 2015-11
• Subjects: Electron-beam welding -- copper -- stainless steel -- cryogenic application -- 316L -- mechanical test -- hardness -- liquid nitrogen -- liquid helium; Materials science -- Periodicals; 620.1105
• DOI: 10.1088/1757-899X/102/1/012017
• Languages: English
• ISSNs: 1757-8981

Abstract

Abstract: Joints between copper and stainless steel are commonly applied in cryogenic systems. A relatively new and increasingly important method to combine these materials is electron-beam (EB) welding. Typically, welds in cryogenic applications need to withstand a temperature range from 300K down to 4K, and pressures of several MPa. However, few data are available for classifying EB welds between OFHC copper and 316L stainless steel. A broad test program was conducted in order to qualify this kind of weld. The experiments started with the measurement of the hardness in the weld area. To verify the leak-tightness of the joints, integral helium leak tests at operating pressures of 16 MPa were carried out at room- and at liquid nitrogen temperature. The tests were followed by destructive tensile tests at room temperature, at liquid nitrogen and at liquid helium temperatures, yielding information on the yield strength and the ultimate tensile strength of the welds at these temperatures. Moreover, nondestructive tensile tests up to the yield strength, i.e. the range in which the weld can be stressed during operation, were performed. Also, the behavior of the weld upon temperature fluctuations between room- and liquid nitrogen temperature was tested. The results of the qualification indicate that EB welded joints between OFHC copper and 316L stainless steel are reliable and present an interesting alternative to other technologies such as vacuum brazing or friction welding.