Active Mixing of Reactive Materials for 3D Printing. Issue 8 (15th May 2019)

• Record Type: Journal Article
• Authors: Golobic, Alexandra M.; Durban, Matthew D.; Fisher, Scott E.; Grapes, Michael D.; Ortega, Jason M.; Spadaccini, Christopher M.; Duoss, Eric B.; Gash, Alexander E.; Sullivan, Kyle T.
• Is Part Of: Advanced engineering materials. Volume 21:Issue 8(2019)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2019-05-15
• Subjects: 3D printing -- active mixing -- additive manufacturing -- reactive materials -- thermites; Materials -- Periodicals; 620.11
• DOI: 10.1002/adem.201900147
• Languages: English
• ISSNs: 1438-1656

Abstract

Abstract : The mixing of materials during additive manufacturing is a major benefit which allows one to compositionally and spatially tailor material properties, for example to locally control the reactivity in fuel – oxidizer systems known as thermites. This work characterizes an active mixing printhead used in conjunction with a 3D printing process known as Direct Ink Writing. Besides compositional control, a major benefit of this approach is that it offers a safe method for working with these materials, which can otherwise be hazardous once mixed. Custom fuel and oxidizer inks are fed at fixed volumetric rates into an active mixing printhead, and both the rotational speed of the mixing impeller as well as the fuel – oxidizer ratio are varied. Upon ignition, the propagation speed increases with the rotational speed of the mixer and plateaus above a critical value of ≈750 rpm. The critical mixing speed is corroborated by computational fluid simulations and an analytical expression that considers the inks' complex fluid behavior. Additionally, varying the composition results in a wide range of propagation speeds with peak reactivity corresponding to a fuel‐rich formulation ( ϕ = 1.5). A test article incorporating a fast‐ and slow‐burning region demonstrates how spatial composition can manipulate the reactivity. Abstract : The in situ mixing of Al and CuO inks in conjunction with additive manufacturing is demonstrated to tailor the energy release of the resulting thermite material. The effect of mixing is investigated and enables the creation of a homogeneous material with a self‐propagating flame. The flame speed is tuned by varying the ratio of the constituent inks. With this method, control over reactivity and improved handling is accomplished.