Laboratory Model Test to Explore the Bearing Mechanism of Composite Foundation in the Loess Area. (18th March 2021)

• Record Type: Journal Article
• Authors: Xu, Longfei; Xu, Weijiang; Zhang, Aijun; Weng, Xiaolin; Zhao, Gaowen; Zhu, Tantan
• Other Names: Zhang Chunshun Academic Editor.
• Is Part Of: Advances in civil engineering. Volume 2021(2021)
• Publication Date: 2021-03-18
• Subjects: Civil engineering -- Periodicals; Civil engineering; Periodicals; 624
• DOI: 10.1155/2021/6658726
• Languages: English
• ISSNs: 1687-8086

Abstract

Abstract : Pile composite foundation can make good use of the bearing capacity of the soil and pile, which is widely used in the Chinese northwest loess area. However, the theory of pile composite foundation is far from sufficient, hindering its long-term development. Aiming at this problem, a laboratory model test of pile composite foundation in the loess area was conducted to explore the common working mechanism and variations of each bearing stage. Besides, the settlement of the single pile composite foundation was calculated by using the modified tangent modulus method, and the result was compared with the experimental data. The main results of this paper are as follows: Both in the single pile and single pile composite foundation, loading-settlement curves showed a trend of "elastic to elastoplastic to plastic, " accompanied by the appearance of plummeting point. Influenced by the pile group effect, the loading-settlement curve of the group pile composite foundation showed a slow-varying trend without an obvious breakdown point. Pile axis stress increased with the growth of upper load. At the beginning of loading, the pile axis stress indicated such a distribution that stress on both ends of the pile was larger than that in the middle of the pile. When reaching a certain load, the location of the biggest pile axis stress transferred to the pile top, and the pile axis stress decreased gradually as the pile became deep. The side friction resistance in the static load test of the single pile was always positive, whereas in the composite foundation of a single pile and a group of piles, negative side resistance appeared in the upper side of the neutral point. Pile-soil stress ratio in the depth of 12 cm changed with the upper load. The outcome calculated by the modified tangent modulus method had a relatively better consistency with experimental data if the upper load was not too large.