3D experimental investigation on enhanced oil recovery by flue gas assisted steam assisted gravity drainage. Issue 4 (July 2021)

• Record Type: Journal Article
• Authors: Tao, Lei; Yuan, Xiao; Huang, Sen; Liu, Nannan; Zhang, Na; Li, Bingchao
• Is Part Of: Energy exploration & exploitation. Volume 39:Issue 4(2021)
• Page Start: 1162
• Page End: 1183
• Publication Date: 2021-07
• Subjects: Flue gas -- SAGD -- steam chamber -- large-scaled 3D physical experiment -- EOR; Power resources -- Periodicals; 333.79
• DOI: 10.1177/01445987211006555
• Languages: English
• ISSNs: 0144-5987

Abstract

Flue gas assisted steam assisted gravity drainage (SAGD) is a frontier technology to enhance oil recovery for heavy oil reservoirs. The carbon dioxide generated from the thermal recovery of heavy oil can be utilized and consumed to mitigate climate warming for the world. However, most studies are limited to merely use numerical simulation or small physical simulation device and hardly focus on large scale three-dimensions experiment, which cannot fully investigate the enhanced oil recovery (EOR) mechanism of flue gas assisted SAGD, thus the effect of flue gas on SAGD production performance is still not very clear. In this paper, large-scaled and high temperature and pressure resistant 3D physical simulation experiment was conducted, where simulated the real reservoir to a maximum extent, and systematically explored the EOR mechanisms of the flue gas assisted SAGD. Furthermore, the differences between the steam huff and puff, SAGD and flue gas assisted SAGD are discussed. The experimental result showed that the production effect of SAGD was improved by injecting flue gas, with the oil recovery was increased by 5.7%. With the help of thermocouple temperature measuring sensors, changes of temperature field display that flue gas can promote lateral re-development of the steam chamber, and the degree of reservoir exploitation around the horizontal wells has been increased particularly. What's more, the addition of flue gas further increased the content of light components and decreased the content of heavy by comparing the content of heavy oil components produced in different production times.