Electrochemical jet-assisted precision grinding of single-crystal SiC using soft abrasive wheel. (1st April 2021)

• Record Type: Journal Article
• Authors: Chen, Zhaojie; Zhan, Shunda; Zhao, Yonghua
• Is Part Of: International journal of mechanical sciences. Volume 195(2021)
• Publication Date: 2021-04-01
• Subjects: Electrochemical jet-assisted grinding -- Electrochemical jet anodization -- Soft abrasive wheel -- Surface integrity -- Bulk micromachining -- Single-crystal SiC; Mechanical engineering -- Periodicals; Génie mécanique -- Périodiques; Mechanical engineering; Maschinenbau; Mechanik; Zeitschrift; Periodicals; 621.05
• DOI: 10.1016/j.ijmecsci.2020.106239
• Languages: English
• ISSNs: 0020-7403

Abstract

Highlights: A novel electrochemical jet-assisted grinding process using a soft abrasive wheel is presented. Hardware development, process response and related mechanisms of EJAG are explained. The EJAG can efficiently reduce the surface roughness, damage, and processing time. EJAG achieves surface roughness approaching that of CMP with processing time 90% shorter. Micro grinding of complex structures on SiC by EJAG is demonstrated. Abstract: The next-generation wide bandgap semiconductor single-crystal SiC is extremely stable both mechanically and chemically, which poses problems for micromachining. In this paper, a novel hybrid process combining electrochemical jet anodization and soft abrasive grinding, namely, electrochemical jet-assisted grinding (EJAG), is proposed to enhance both the grinding efficiency and surface integrity of SiC. This process combines characteristics from jet-electrochemical machining (jet-ECM) and grinding into a new micromachining process. In EJAG, the interaction of the jet with the local material efficiently oxidizes the workpiece surface and results in a softened modified layer, which enables the application of soft abrasive grinding to machine SiC with the introduction of little subsurface damage. In this study, details of this hybrid EJAG process are presented, and the process-material interaction is examined experimentally. The material removal mechanism and surface morphology are investigated via anodization/grinding results and scanning electron microscope/atomic force microscope (SEM/AFM) studies. On the basis of a nanoindentation test, the microhardness of SiC decreases by 90% after electrochemical jet anodization (EJA) compared with the unmodified surface. The grinding results show that with the assistance of EJA, both the machining rate and wear resistance of the wheel can be improved. In addition, the surface quality resulted from the proposed EJAG method is close to that from polishing by chemical mechanical polishing (CMP), while the processing time is evidently shorter. By utilizing a cylindrical corundum rod as the grinding wheel, EJAG realized localized machining of microcavities in predefined areas with an extremely smooth surface finish (Sa = 2.18 nm). A three-level and four-factor orthogonal experiment was designed to obtain the optimum conditions. Based on this, a highly efficient material removal rate (MRR) of SiC while maintaining a defect-free surface was demonstrated. Graphical abstract: Image, graphical abstract