Experimental evaluation of methanol-gasoline fuel blend on performance, emissions and lubricant oil deterioration in SI engine. (June 2021)

• Record Type: Journal Article
• Authors: Ijaz Malik, Muhammad Ali; Usman, Muhammad; Hayat, Nasir; Zubair, Syed Wasim Hassan; Bashir, Rehmat; Ahmed, Ehtasham
• Is Part Of: Advances in mechanical engineering. Volume 13:Number 6(2021)
• Publication Date: 2021-06
• Subjects: Methanol blend -- SI engine -- environmental pollution -- engine performance -- lubricant degradation -- Fuel dilution; Mechanical engineering -- Periodicals; 621.05
• DOI: 10.1177/16878140211025213
• Languages: English
• ISSNs: 1687-8132

Abstract

Graphical Abstract Methanol showed promising results as an alternative to gasoline fuel. However, there exists a research gap for the effect of oxygenated fuel on lubricant oil deterioration along-with engine performance and emissions. This study aims the very topic. The characteristics of SI engine were evaluated for two different loads and nine different engine speeds. The lubricant oil samples were taken out from engine oil sump after 100 h of engine operations using gasoline (G) and M12 sequentially. The brake power of M12 was observed higher in comparison with G. The maximum BTE of 23.69% was observed for M12 on lower load and 2800 rpm. On average, the 6.05% and 6.31% decrease in HC emissions were observed using M12 in comparison with G at lower and higher load respectively. M12 produced 32.52% higher NOx emissions than that of G at lower load. The reduction in kinematic viscosities at 40°C of lubricant oil were found 11.61% and 18.78% for M12 and G respectively. TAN, specific gravity, flash point and ash content of lubricant oil were observed 10.23%, 0.079%, 5.81% and 0.97% higher for M12 respectively. The lubricant oil composition could be developed in future for such fuels which may prolong its life cycle.