It's worth cleaning – The examination of the female taper could identify a particular cause of trunnionosis at revision 16 years after total hip arthroplasty. (March 2021)

• Record Type: Journal Article
• Authors: Büchner, Mara; Cook, Richard B.; Dommann-Scherrer, Corina; Meier, Christoph; Dommann, Alex; Wahl, Peter
• Is Part Of: Journal of the mechanical behavior of biomedical materials. Volume 115(2021)
• Publication Date: 2021-03
• Subjects: Trunnionosis -- Metal-on-metal -- Total hip replacement -- THR -- Adverse reaction to metal debris -- ARMD; ARMD adverse reaction to metal debris -- MoM metal-on-metal -- THR total hip replacement -- CMM coordinate measuring machine; Biomedical materials -- Periodicals; Biomedical materials -- Mechanical properties -- Periodicals; Biomedical materials; Biomedical materials -- Mechanical properties; Periodicals; Electronic journals; 610.28
• DOI: 10.1016/j.jmbbm.2020.104304
• Languages: English
• ISSNs: 1751-6161

Abstract

Abstract: Adverse reaction to metal debris (ARMD) is an issue in metal-on-metal (MoM) total hip replacements (THR). It mainly affects large-head MoM THR, whereas 28–32 mm MoM pairings are associated with low long-term revision rates. However, the bearing surface is not necessarily the only cause of metal debris. This report documents with advanced analysis of the retrievals a particular cause of trunnionosis in late failure of a small diameter MoM THR and illustrates the importance of cleaning of the taper when seating the head in THR. A 65-year-old patient was revised due to ARMD 16 years after small diameter MoM THR. Debridement and exchange of the inlay and the head had been performed through an anterior approach. While the cup and the outer surface of the head were accessible to direct analysis by an optical coordinate measuring machine, the female taper had to be analysed indirectly by measuring an imprint. Wear from the cup and the head was within expected low ranges. The analysis of the female taper identified bone fragments, which contributed to trunnionosis. Failure due to ARMD after MoM THR is not necessarily caused by the bearing, but can be due to trunnionosis. Bone fragments within the taper contact in this case highlight the importance of meticulous cleaning of the taper before seating the head, to avoid trunnionosis.