A copper‐specific microbial fuel cell biosensor based on riboflavin biosynthesis of engineered Escherichia coli. Issue 1 (28th September 2020) - Zhou, Tuoyu
Abstract: Copper pollution poses a serious threat to the aquatic environment; however, in situ analytical methods for copper monitoring are still scarce. In the current study, Escherichia coli Rosetta was genetically modified to express OprF and ribB with promoter Pt7 and PcusC, respectively, which could synthesize porin and senses Cu 2+ to produce riboflavin. The cell membrane permeability of this engineered strain was increased and its riboflavin production (1.45–3.56 μM) was positively correlated to Cu 2+ (0–0.5 mM). The biosynthetic strain was then employed in microbial fuel cell (MFC) based biosensor. Under optimal operating parameters of pH 7.1 and 37°C, the maximum voltage (248, 295, 333, 352, and 407 mV) of the constructed MFC biosensor showed a linear correlation with Cu 2+ concentration (0.1, 0.2, 0.3, 0.4, 0.5 mM, respectively; R 2 = 0.977). The continuous mode testing demonstrated that the MFC biosensor specifically senses Cu 2+ with calculated detection limit of 28 μM, which conforms to the common Cu 2+ safety standard (32 μM). The results obtained with the developed biosensor system were consistent with the existing analytical methods such as colorimetry, flame atomic absorption spectrometry, and inductively coupled plasma optical emission spectrometry. In conclusion, this MFC‐based biosensor overcomes the signal conversion and transmission problems of conventional approaches, providing a fast and economic analytical alternative for in situ monitoring of Cu 2+ in water. Abstract : A copper specific MFC biosensor was constructed by employing a recombinant E. coli . The engineered exoelectrogen was activated by Cu 2+ to produce riboflavin, thus increasing the voltage generation of the MFC reactor. In the linear range, the output voltage reflects the copper pollution in the water.