Simultaneous and continuous particle separation and counting via localized DC-dielectrophoresis in a microfluidic chip. Issue 7 (19th January 2021)

• Record Type: Journal Article
• Authors: Song, Yongxin; Han, Xiaoshi; Li, Deyu; Liu, Qinxin; Li, Dongqing
• Is Part Of: RSC advances. Volume 11:Issue 7(2021)
• Page Start: 3827
• Page End: 3833
• Publication Date: 2021-01-19
• Subjects: Chemistry -- Periodicals; 540.5
• DOI: 10.1039/d0ra10296b
• Languages: English
• ISSNs: 2046-2069

Abstract

Abstract : The first report that particle counting and separation can be achieved simultaneously. Separation and counting of polystyrene particles of two and three different sizes with 1 μm resolution were demonstrated experimentally. Abstract : A novel microfluidic method of counting the number of particles while they are separated by a localized DC-dielectrophoresis force was presented. Liquid flow from a wide microchannel forces the to-be-detected particles to pass over a small orifice on a side wall of the sample input channel. A direct current (DC) voltage applied across the small orifice and a strong electric field gradient is generated at the corners of the orifice for dielectrophoretic particle separation. Particle counting is achieved by detecting the electric current change caused by the being-separated particle near the sensing orifice. In this way, particles can be separate and in situ counted at the same time. Numerical simulations show that particle separation is achieved at the edge of the sensing orifice where the strength of the electric field gradient is the largest. Separation and counting of polystyrene particles of two and three different sizes with 1 μm resolution were demonstrated experimentally.