Benzylalkohol – Bestimmung von Benzylalkohol in der Luft am Arbeitsplatz mittels Gaschromatographie nach Thermodesorption [Air Monitoring Methods in German language, 2018]. Issue 4 (19th October 2018)

• Record Type: Journal Article
• Authors: Tschickardt, M.; Krämer, W.; Schmitt, R.; Hebisch, R.; Hartwig, A.
• Is Part Of: MAK collection for occupational health and safety. Volume 3:Issue 4(2018)
• Page Start: 2098
• Page End: 2114
• Publication Date: 2018-10-19
• Subjects: Benzylalkohol -- Arbeitsplatzmessung -- Gefahrstoffe -- Luftanalysen -- Messverfahren -- Quarzfaserfilter -- Tenax TA -- Gaschromatographie -- GC‐FID -- GC‐MSD -- Thermodesorption -- GGP‐Mini; Biological monitoring -- Periodicals; Industrial toxicology -- Periodicals; Hazardous substances -- Periodicals; 615.902
• DOI: 10.1002/3527600418.am10051d0020
• Languages: English
• ISSNs: 2509-2383

Abstract

Abstract: This analytical method is a validated measurement procedure for the determination of benzyl alcohol [100‐51‐6 ] in workplace air in a concentration range of one tenth up to twice the currently valid MAK value of 22 mg/m 3 . With this method simultaneously airborne benzyl alcohol in the gaseous state as well as particles are collected. Sampling is performed by drawing a defined volume of air through a quartz fibre filter located in the sampling head with an adsorption tube filled with Tenax TA connected downstream using a suitable pump. The flow rate is set to 0.066 L/min with a recommended air sample volume of approx. 4 litres. The collected benzyl alcohol is thermally desorbed and then analysed by means of gas chromatography using two detectors, a FID for quantification and a MSD to recognise potential interferences. The quantitative determination is based on a calibration function obtained by means of a multi‐point calibration. The limit of quantification is 0.24 mg/m 3 based on an air sample of approx. 4 litres.