Effects of petroleum sludge ash in fly ash-based geopolymer mortar. (22nd February 2021)

• Record Type: Journal Article
• Authors: Usman Kankia, Mubarak; Baloo, Lavania; Mohammed, Bashar S.; Hassan, Suhaimi B.; Haruna, Sani; Danlami, Nasiru; Affiana Ishak, Effa; Nurliyana Samahani, Wan
• Is Part Of: Construction & building materials. Volume 272(2021)
• Publication Date: 2021-02-22
• Subjects: Petroleum sludge ash -- Precursor material -- Geopolymer mortar -- Compressive strength -- Microstructural properties; Building materials -- Periodicals; 624.18
• DOI: 10.1016/j.conbuildmat.2020.121939
• Languages: English
• ISSNs: 0950-0618

Abstract

Highlights: The petroleum sludge was thermally treated. The PSA has good morphology, particle size, functional groups, chemical composition and mineral phases. PSA could be used as a pozzolanic material for green construction. The incorporation of 10% PSA enhances the compressive strength. Abstract: Due to its encapsulation capacity and low carbon emission, geopolymer mortar is recognized as a possible substitute for Portland cement. This paper reports an experimental procedure of producing geopolymer mortar using petroleum sludge ash (PSA) and fly ash. Replacement levels of PSA were 0 – 20% by the weight of fly ash, 8 – 16 molarity of NaOH, 1.5 – 2.5 ratio of Na2 SiO3 to NaOH were used. The 28 days compressive strength of geopolymer mortar made with 10% PSA was found to be the highest (31 MPa). Using variance analysis, the influence of NaOH concentration, the ratio of Na2 SiO3 to NaOH, and PSA on the behavior of geopolymer mortars was acquired. The defined models were found to be significant for p-values < 5%. The concentrations of the targeted heavy metals were found to be within the permissible level of USEPA.