Investigation of surface strain by digital image correlation and charge trap characteristics of epoxy alumina nanocomposites. (4th June 2020)

• Record Type: Journal Article
• Authors: Neelmani, ; Velmurugan, R; Jayaganthan, R; Sarathi, R; Suematsu, H
• Is Part Of: Nano express. Volume 1:Number 1(2020)
• Publication Date: 2020-06-04
• Subjects: nanocomposites -- surface strain -- surface potential -- digital image correlation; Nanotechnology -- Periodicals; Nanoscience -- Periodicals; 620.5
• DOI: 10.1088/2632-959X/ab95e7
• Languages: English
• ISSNs: 2632-959X

Abstract

Abstract: Epoxy alumina nanocomposites were fabricated through shear mixing of alumina nanoparticles in to epoxy resin under optimum process conditions for its potential application as insulator in transformer. The fundamental insight in to the influence of ageing of nanocomposite insulator due to its continuous exposure to UV irradiation and water in terms of their charge trap characteristics was explored. The surface potential decay and strain variation of nanocomposite samples were measured by using Electrostatic voltmeter and Digital Image Correlation technique (DIC), respectively. Diffusion of water into epoxy alumina nanocomposite is less compared with pure epoxy resin. It has been observed that surface potential decay rate and trap depth have shown increasing and decreasing trend, respectively, with the addition of alumina nanoparticles in to epoxy resin. The UV and water aged nanocomposites exhibited a decreasing trend of surface potential decay rate and the governing reasons could be due to surface damage causing increase in deep trap formation. The tensile strength and stiffness of the samples have increased with the addition of alumina nanoparticles in to the epoxy resin. It could be due to the better bonding of alumina particles with epoxy resin. The surface strain induced in to the sample during tensile loading and the surface potential decay rate of nanocomposite has shown a direct correlation, as observed in the present work.