Microstructure evolution and mechanical properties at high temperature of selective laser melted AlSi10Mg. (30th January 2021)

• Record Type: Journal Article
• Authors: Cao, Y.; Lin, X.; Wang, Q.Z.; Shi, S.Q.; Ma, L.; Kang, N.; Huang, W.D.
• Is Part Of: Journal of materials science & technology. Volume 62(2021)
• Page Start: 162
• Page End: 172
• Publication Date: 2021-01-30
• Subjects: Selective laser melting -- AlSi10Mg -- Microstructure -- In-situ EBSD -- High temperature tensile property; Metals -- Periodicals; Materials science -- Periodicals; Materials science; Metals; Periodicals; 620.1105
• DOI: 10.1016/j.jmst.2020.04.066
• Languages: English
• ISSNs: 1005-0302

Abstract

Abstract: In this study, the microstructure and tensile properties of selective laser melted AlSi10Mg at elevated temperature were investigated with focus on the interfacial region. In-situ SEM and in-situ EBSD analysis were proposed to characterize the microstructural evolution with temperature. The as-fabricated AlSi10Mg sample presents high tensile strength with the ultimate tensile strength (UTS) of ∼450 MPa and yield strength (YS) of ∼300 MPa, which results from the mixed strengthening mechanism among grain boundary, solid solution, dislocation and Orowan looping mechanism. When holding at the temperature below 200 °C for 30 min, the microstructure presents little change, and only a slight decrement of yield strength appears due to the relief of the residual stress. However, when the holding temperature further increases to 300 °C and 400 °C, the coarsening and precipitation of Si particles in α-Al matrix occur obviously, which leads to an obvious decrease of solid solution strength. At the same time, matrix softening and the weakness of dislocation strengthening also play important roles. When the holding temperature reaches to 400 °C, the yield strength decreases significantly to about 25 MPa which is very similar to the as-cast Al alloy. This might be concluded that the YS is dominated by the matrix materials. Because the softening mechanism counteracts work hardening, the extremely high elongation occurs.