Advances in the Design of 3D‐Structured Electrode Materials for Lithium‐Metal Anodes. Issue 51 (24th September 2020)

• Record Type: Journal Article
• Authors: Park, Sunwoo; Jin, Hyoung‐Joon; Yun, Young Soo
• Is Part Of: Advanced materials. Volume 32:Issue 51(2020)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2020-09-24
• Subjects: current collectors -- lithium composites -- lithium‐metal anodes -- metal batteries -- nanostructured electrodes; Materials -- Periodicals; Chemical vapor deposition -- Periodicals; 620.11
• DOI: 10.1002/adma.202002193
• Languages: English
• ISSNs: 0935-9648

Abstract

Abstract: Although the lithium‐metal anode (LMA) can deliver a high theoretical capacity of ≈ 3860 mAh g −1 at a low redox potential of − 3.040 V (vs the standard hydrogen electrode), its application in rechargeable batteries is hindered by the poor Coulombic efficiency and safety issues caused by dendritic metal growth. Consequently, careful electrode design, electrolyte engineering, solid‐electrolyte interface control, protective layer introduction, and other strategies are suggested as possible solutions. In particular, one should note the great potential of 3D‐structured electrode materials, which feature high active specific surface areas and stereoscopic structures with multitudinous lithiophilic sites and can therefore facilitate rapid Li‐ion flux and metal nucleation as well as mitigate Li dendrite formation through the kinetic control of metal deposition even at high local current densities. This progress report reviews the design of 3D‐structured electrode materials for LMA according to their categories, namely 1) metal‐based materials, 2) carbon‐based materials, and 3) their hybrids, and allows the results obtained under different experimental conditions to be seen at a single glance, thus being helpful for researchers working in related fields. Abstract : The design of 3D‐structured electrode materials for lithium‐metal anodes is reviewed according to their categories; namely, 1) metal‐based materials, 2) carbon‐based materials, and 3) their hybrids. The results obtained under different experimental conditions can therefore be seen in a single glance, thus being helpful for researchers working in related fields.