Evaluation of the residual stress in stainless steel 304L hydraulically expanded joints. (April 2021)

• Record Type: Journal Article
• Authors: Hong, Ying; Wang, Xuesheng; Wang, Yan; Zhang, Zhao; Han, Yong
• Is Part Of: Proceedings of the Institution of Mechanical Engineers. Volume 235:Number 2(2021)
• Page Start: 428
• Page End: 439
• Publication Date: 2021-04
• Subjects: Hydraulic expanded joint, stainless steel 304L, stress corrosion cracking, residual stress, finite element method; Mechanical engineering -- Periodicals; Production engineering -- Periodicals; Manufacturing processes -- Periodicals; 621.05
• DOI: 10.1177/0954408920964019
• Languages: English
• ISSNs: 0954-4089

Abstract

Stainless steel 304 L tubes are commonly used in the fabrication of heat exchangers for nuclear power stations. The stress corrosion cracking (SCC) of 304 L tubes in hydraulically expanded tube-to-tubesheet joints is the main reason for the failure of heat exchangers. In this study, 304 L hydraulically expanded joint specimens were prepared and the residual stresses of a tube were evaluated with both an experimental method and the finite element method (FEM). The residual stresses in the outer and inner surfaces of the tube were measured by strain gauges. The expanding and unloading processes of the tube-to-tubesheet joints were simulated by the FEM. Furthermore, an SCC test was carried out to verify the results of the experimental measurement and the FEM. There was good agreement between the FEM and the experimental results. The distribution of the residual stress of the tube in the expanded joint was revealed by the FEM. The effects of the expansion pressure, initial tube-to-hole clearance, and yield strength of the tube on the residual stress in the transition zone that lay between the expanded and unexpanded region of the tube were investigated. The results showed that the residual stress of the expanded joint reached the maximum value when the initial clearance was eliminated. The residual stress level decreased with the decrease of the initial tube-to-hole clearance and yield strength. Finally, an effective method that would reduce the residual stress without losing tightness was proposed.