Atomic-scale constituting stable interface for improved LiNi0.6Mn0.2Co0.2O2 cathodes of lithium-ion batteries. (23rd December 2020)

• Record Type: Journal Article
• Authors: Wang, Xin; Cai, Jiyu; Liu, Yongqiang; Han, Xiaoxiao; Ren, Yang; Li, Jianlin; Liu, Yuzi; Meng, Xiangbo
• Is Part Of: Nanotechnology. Volume 32:Number 11(2021)
• Publication Date: 2020-12-23
• Subjects: lithium-ion batteries -- nickel-rich cathodes -- atomic layer deposition -- surface modification -- solid electrolyte interphase -- metal dissolution -- mechanical integrity; Nanotechnology -- Periodicals; Nanotechnology -- Periodicals; Nanotechnology; Publications périodiques; Nanotechnologies; Periodicals; 620.5
• DOI: 10.1088/1361-6528/abd127
• Languages: English
• ISSNs: 0957-4484

Abstract

Abstract: Ascribed to their higher capacity and lower cost compared to conventional LiCoO2, the Ni-rich layered LiNi0.6 Mn0.2 Co0.2 O2 (NMC622) is now considered as one promising cathode for lithium-ion batteries (LIBs). However, it still suffers from some evident performance degradation, especially under high cutoff voltages (i.e., >4.3 V versus Li/Li + ). The performance degradation typically is exhibited as capacity fading and voltage drop, mainly originating from an instable interface between the NMC622 and electrolyte as well as the evolution of the NMC structure. To improve the interfacial and structural stability of NMC cathodes, herein we deposited an ultrathin layer of Al2 O3 coatings (<5 nm) conformally over NMC622 composite electrodes directly using atomic layer deposition (ALD). It was found that, under different upper cutoff voltages (4.3, 4.5, and 4.7 V), the ALD Al2 O3 coatings enable enhanced performance of NMC622 cathodes with better cyclability and higher capacity. Particularly, the beneficial effects of the ALD Al2 O3 coatings are more remarkable at higher upper cutoff voltages (4.5 and 4.7 V). Furthermore, the ALD coatings can significantly improve the rate capability of NMC622. To this end, we utilized a suite of characterization tools and performed a series of electrochemical tests to clarify the effects of the ALD Al2 O3 coatings. This study revealed that the beneficial effects of the Al2 O3 ALD coatings are multiple: (i) serving as an artificial layer of solid electrolyte interphase to mitigate undesirable interfacial reactions; (ii) acting as a physical barrier to inhibit metal dissolution of NMC; and (iii) forming a reinforced networked overcoating to boost the mechanical integrity of NMC cathodes. This study is favorable for designing high-performance NMC cathodes.