Response analysis of 3D braided two-stage gear system excited by different frequency signals. (March 2021)

• Record Type: Journal Article
• Authors: Zhang, Weiliang; Wang, Xupeng; Ji, Xiaomin; Tang, Xinyao; Liu, Fengfeng; Liu, Shuwei; Xue, Tengyuan
• Is Part Of: Advances in mechanical engineering. Volume 13:Number 3(2021)
• Publication Date: 2021-03
• Subjects: Two-stage gear system -- dynamic model -- 3D braided gear -- vibration resonance; Mechanical engineering -- Periodicals; 621.05
• DOI: 10.1177/16878140211005197
• Languages: English
• ISSNs: 1687-8132

Abstract

The knitting principle of 3D braided gear was studied, and the dynamic model of the two-stage gear system was established. The fourth-order Runge-Kutta method was used to numerically simulate the dynamic characteristics of common gear and 3D braided gear. The results showed that the fundamental frequency ω1 of the static transmission error excitation had the greatest effect on the speed and frequency characteristics of the first-stage gear along the meshing line. The research on frequency characteristics of common gear and 3D braided gear shows that the fundamental frequency ω1 of the static transmission error excitation has a large effect on the speed and frequency characteristics of the first-stage gear along the meshing line. With the reduction of the gear mass and moment of inertia, the amplitude in the low-frequency band increases. The vibration resonance of the system is studied by defining the amplitude gain of the response of the system output at the low-frequency signal ω3 . The results show that with the reduction of gear mass and moment of inertia, when the input stage torque fluctuation frequency is Ω > 5, the fluctuation of amplitude gain Q disappears, which indicates that the vibration resistance of the 3D braided gear to high-frequency input stage torque fluctuation frequency is greatly improved.