Enhancement of sensitivity of magnetostrictive foam in low magnetic fields for sensor applications. (21st December 2020)

• Record Type: Journal Article
• Authors: Norhaniza, Rizuan; Mazlan, Saiful Amri; Ubaidillah, ; Abdul Aziz, Siti Aishah; Nazmi, Nurhazimah; Yunus, Nurul Azhani
• Is Part Of: Polymer. Volume 211(2020)
• Publication Date: 2020-12-21
• Subjects: Foams -- Polymer-matrix composites (PMCs) -- Porosity; Polymers -- Periodicals; Polymerization -- Periodicals; Polymères -- Périodiques; Polymérisation -- Périodiques; 547.7
• DOI: 10.1016/j.polymer.2020.123083
• Languages: English
• ISSNs: 0032-3861

Abstract

Abstract: Magnetostrictive materials are usually used in sensor technology since they are sensitive to magnetization and strain. Unfortunately, to date, only a few magnetostrictive materials are being used, as the need for a strong magnetic field (1 T) and not sensitive at a low magnetic field. Thus, in this study, a new magneto-active (MA) polyurethane foam was fabricated to obtain a strain at a low magnetic field corresponding to below 1 T. The in-situ fabrication of the MA foam was carried out with various compositions of carbonyl iron particles (CIPs), particularly at 35, 45, 55, 65 and 75 wt%. An analysis of the magnetic properties revealed that all the MA foams showed high magnetic saturation with low remanence values. Furthermore, the MA foam of 75 wt% showed the highest magnetostrictive strain of 1.66% at 0.45 T. The sensitivity of the MA foam is 0.0146%/mT with 42% of improvement. Analyses show MA foam of 75 wt% had a low density, biggest pores and long struts that might have led to high flexibility for elongation to produce a high strain percentage within the practical magnetic field range. Hence, this MA foam can be further utilized for sensor applications. Graphical abstract: Image 1 Highlights: MA foams with 75 wt% carbonyl iron particles (CIPs) shows high sensitivity magnetostriction effect 0.0146%/mT. The MA foam shows short time respond and repeatable capabilities. The concentration of CIPs changes the morphology and porosity of MR foam significantly. Bigger pores size and long strut increase the sensitivity of the MA foams.