Aerodynamic noise from an asymmetric airfoil with perforated extension plates at the trailing edge. Issue 1 (March 2021)

• Record Type: Journal Article
• Authors: Sumesh, CK; Jothi, TJS
• Is Part Of: International journal of aeroacoustics. Volume 20:Issue 1/2(2021)
• Page Start: 88
• Page End: 108
• Publication Date: 2021-03
• Subjects: Asymmetric airfoil -- perforations -- trailing edge noise -- pore diameter -- open area ratio; Aerodynamic noise -- Periodicals; Acoustical engineering -- Periodicals; Sound -- Periodicals; 629.1323
• DOI: 10.1177/1475472X20978388
• Languages: English
• ISSNs: 2048-4003

Abstract

This paper investigates the noise emissions from NACA 6412 asymmetric airfoil with different perforated extension plates at the trailing edge. The length of the extension plate is 10 mm, and the pore diameters ( D ) considered for the study are in the range of 0.689 to 1.665 mm. The experiments are carried out in the flow velocity ( U∞ ) range of 20 to 45 m/s, and geometric angles of attack ( αg ) values of −10° to +10°. Perforated extensions have an overwhelming response in reducing the low frequency noise (<1.5 kHz), and a reduction of up to 6 dB is observed with an increase in the pore diameter. Contrastingly, the higher frequency noise (>4 kHz) is observed to increase with an increase in the pore diameter. The dominant reduction in the low frequency noise for perforated model airfoils is within the Strouhal number (based on the displacement thickness) of 0.11. The overall sound pressure levels of perforated model airfoils are observed to reduce by a maximum of 2 dB compared to the base airfoil. Finally, by varying the geometric angle of attack from −10° to +10°, the lower frequency noise is seen to increase, while the high frequency noise is observed to decrease.