Study on the Origin and Fluid Identification of Low-Resistance Gas Reservoirs. (2nd December 2020)

• Record Type: Journal Article
• Authors: Yuhui, Zhou; Qingxiong, Hu; Wentao, Liu; Zhiqi, Wu; Yule, Yan; Jialing, Ma
• Other Names: Zhan Shiyuan Academic Editor.
• Is Part Of: Geofluids. Volume 2020(2020)
• Publication Date: 2020-12-02
• Subjects: Hydrogeology -- Periodicals; Sedimentary basins -- Periodicals; Fluids -- Migration -- Periodicals; Groundwater flow -- Periodicals; Geothermal resources -- Periodicals; Fluid dynamics -- Periodicals; Earth -- Crust -- Periodicals; 551.49
• DOI: 10.1155/2020/8859309
• Languages: English
• ISSNs: 1468-8115

Abstract

Abstract : The Wu 2 section of the Ke017 well block is a low-resistance gas reservoir with ultralow porosity and low permeability. The comprehensive analysis of rock lithology, physical properties, sedimentary characteristics, and gas content demonstrated that the development of micropores in illite/smectite dominated clay minerals together with the resulted additional conductivity capability and complex reservoir pore structures, as well as the enrichment of self-generating conductivity minerals like zeolites and pyrite which were the formation mechanisms of low-resistance gas layers in the Wu 2 section. A low-resistance gas reservoir has poor physical property, and it is difficult to distinguish the oil layer from the dry, gas, or water layers. In this paper, based on well/mud logging data and laboratory data, by taking advantages of the "excavation effect" of neutron gas and the dual-lateral resistivity difference between different depths, we successfully established a set of low-contrast log response methods for the identification and evaluation of oil layer and formation fluids. For a gas layer, the difference between neutron porosity and acoustic (or density) porosity is smaller than 0 and the difference in dual-lateral resistivity is greater than 0. For a water layer, the neutron porosity is similar to the acoustic (or density) porosity and the dual-lateral resistivity difference will be less than 0. While for a dry layer or a layer with both gas and water, the difference in porosity as well as dual-lateral resistivity is very small. The proposed method effectively solves the technical problem of oil layer and formation fluid identification in low-resistance gas reservoirs.