A specific exergy costing assessment of the integrated copper-chlorine cycle for hydrogen production. (13th November 2020)

• Record Type: Journal Article
• Authors: Razi, Faran; Dincer, Ibrahim; Gabriel, Kamiel
• Is Part Of: International journal of hydrogen energy. Volume 45:Number 56(2020)
• Page Start: 31425
• Page End: 31439
• Publication Date: 2020-11-13
• Subjects: Hydrogen production -- Specific exergy costing -- Copper-chlorine cycle -- Exergoeconomic analysis -- Exergy; Hydrogen as fuel -- Periodicals; Hydrogène (Combustible) -- Périodiques; Hydrogen as fuel; Periodicals; 665.81
• DOI: 10.1016/j.ijhydene.2020.08.269
• Languages: English
• ISSNs: 0360-3199

Abstract

Abstract: In this study the specific exergy costing (SPECO) approach is employed on a four-step integrated thermochemical copper-chlorine (Cu Cl) cycle for hydrogen production for a second-law based assessment purposes. The Cu–Cl cycle is considered as one of the most environmentally benign and sustainable options of producing hydrogen and is thus investigated in this study due to its potential of ensuring zero greenhouse gas (GHG) emissions. Several conceptual Cu–Cl cycles have been exergoeconomically examined previously, however this study aims at investigating the four-step integrated Cu–Cl cycle developed at the Clean Energy Research Laboratory (CERL) at the Ontario Tech University thereby contributing to the thermo/exergoeconomic assessments of the thermochemical hydrogen production. In this study, the cycle is first thermodynamically modeled and simulated in a process simulation software (Aspen Plus) through exergy and energy approaches. The basic principles of the SPECO methodology are applied to the system and exergetic cost balances are performed for each cycle component. The exergetic costing of each cycle stream is then performed based on the cost balance equations. The purchased equipment cost and the hourly levelized capital cost rates for each cycle component is also obtained. The exergoeconomic factor, relative cost difference and exergy destruction cost rate for various cycle components are also evaluated. Moreover, the effect of several parameters on the total and hourly levelized capital cost rates is analyzed by performing a comprehensive sensitivity analysis. Based on the analysis, the exergy cost, the unit or specific exergy cost, and the unit costs of hydrogen are evaluated to be 6407.55 $/h, 0.042 $/MJ, and 4.94 $/kg respectively. Highlights: Exergoeconomic analysis of an integrated copper-chlorine thermochemical cycle. Application of the specific exergy costing (SPECO) approach. Unit cost of hydrogen estimated to be 4.94 $/kg. Hydrogen production capacity of 1296 kg/h.